Exos Leak
2Pages

{{requestButtons}}

Catalog excerpts

Exos Leak - 1

Leak THE MICRO-LEAK ANALYSER FOR ALL TYPES OF PACKAGING BENEFITS Measure, audit, and optimise your packaging process in controlled, reproducible test conditions. Check «easy open» packages with a dynamic burst or resistance measurement. The solution for vacuum-sealed packaging : Measure leaks immediately after sealing. Dry and hygienic tests : No tracer gas. Measure and evaluate the slightest technical changes. Help in creating packaging : Materials, structure, design, etc. How can you control the quality of your packaging? EXOS is easy to use, testing the tightness and strength of seals on all types of packaging and containers. EXOS gives you complete information about the initial condition of your packaging so you can identify the expiry date or best-before date. EXOS measures : • Leaks down to 5 µm (leak flow rate given in ml/min) • The creep test of the packaging • The strength of seals up to 1.4 bar This adaptable device is suitable for laboratory and production use. EXOS measures and quantifies the essential parameters for your packaging inspections. FEATURES • Measures micro-leaks + creep test + seal strength • Meets standards DIN 55508-1 : measures flow rate at constant pressure ASTM F1140 : seal strength ASTM F2054 : burst test • Highest sensitivity in very low overpressure: micro-leaks down to 5 μm at over 10 mbar • Measures breathability: micro-perforated films • Detects clogged circuits • Wholly traceable: use all data analysis possibilities via USB, Ethernet, or directly in your ERP system. • Remote connection and 24/7 remote maintenance: leverage the power of connected technology. SCOPE OF APPLICATION EXOS is used in the food processing, cosmetics, and pharmaceutical industries for all types of packaging including vacuum sealed, flexible, rigid, semi-rigid, and m

Open the catalog to page 1
Exos Leak - 2

6XOS Leak HOW DOES IT WORK? video link 1. Select the programme LEAK MEASUREMENT CREEP TEST or Select a program. Use the retaining arm to pierce the packaging with a needle through a septum. Once the needle is in position, the test can begin. The device measures the airflow needed to maintain a set overpressure in the packaging. Leaks are shown metrologically in ml/min and equivalent pm. Application of a constant test pressure to the packaging and monitoring of flow and pressure as a function of time. Pressure is applied to the package to measure the pressure needed to burst the package....

Open the catalog to page 2

All ANEOLIA catalogs and technical brochures

Archived catalogs