BENEFITS Quickly measure O2 : < 5 seconds, very fast sensor Compliant with the NF EN ISO 7396-1 standard : Regulatory requirement for the final inspection of medical gas systems Easy to use : Automatically detects fluids (O2, vacuum, medical air, motor air & CO2 as an option) Practical : A light and portable analyser that can be carried to different rooms • Automatic gas identification: O2, vacuum, medical air, motor air & optional CO2 detection to distinguish between N2O and CO2 • Conforms to the NF EN ISO 7396-1 standard • Accommodates numerous gas outlets: NF, DIN, BS • LED alarm displays according to normalised thresholds • Automatic fluid detection • Rechargeable battery • T90 response time: < 5 sec. The MERCURY is used in the medical sector for testing wall sockets in rehabilitation centres, hospitals, clinics and nursing facilities, etc. How can you test gas systems in medical environments ? The Mercury is an oxygen and pressure analyser with CO2 detection available as an option for testing medical liquid systems (e.g. testing wall-mounted room outlets or in operating suites). The Mercury allows you to check medical liquid supplied via the appropriate, correctly identified wall outlet. Used in rehabilitation centres, hospitals, clinics and nursing facilities, this gas analyser and medical fluid detector meets the NF EN ISO 7396-1 standard to which installers must conform for the final inspection of their work. This standalone device is equipped with a rechargeable battery. After five minutes of inactivity, the device automatically switches to standby mode to save power.

O2 or O2&CO2 HOW DOES IT WORK? 1. Prepare the tes^H ^ 2. Start the ^ 3. End of the test Start the analyser, plug the right nozzle into the wall outlet and the gas circulates in the device. GAS ANALYSIS In a few seconds, the device shows the O2 result, the pressure and the Remove the n°zzle from fluid detected. the wall outlet. The device is ready for another test. SPECIFICATIONS MERCURY O2 or 02&CO2 Portable IP41 analyser in aluminium with 2-line 8-character LCD Device interface, 2 alarm LEDs, 1 system defect LED, 1 battery charge OPTIONS • CO2 detection with appropriate nozzle Power supply 100-250...