Oxygenon-I

Oxygenon-I

Oxygenon-I

Product catalog summary
Special Characteristics:
  • Broad spectrum of efficacy
  • High material compatibility, including sensitive materials like acrylic glass
  • No toxic residues
  • Low environmental impact
  • Rapidly dissolvable without long stirring
  • Free of conventional active ingredients such as aldehydes, QACs, alcohols, or chlorine
Product Overview - Oxygenon-I:
  • Spectrum of Efficacy: Bactericidal, yeasticidal, tuberculocidal, virucidal, sporicidal
  • Listings: VAH-list, Storz-list
  • Composition: 60 g Caroat per 100 g
Fields of Application:

Oxygenon-I is used for the manual reprocessing of surgical instruments, laboratory equipment, and medical devices such as tracheostomy tubes. It is effective against C. difficile and suitable for use in ultrasonic baths at a concentration of 1.5% with a contact time of 15 minutes at a maximum water temperature of 25°C.

Recommendations for Use:
  • Test Concentration and Contact Time:
    • VAH – Instrument Disinfection: 1.5% for 15 min, 0.5% for 60 min
    • Tuberculocidal: 1.5% for 60 min
    • Virucidal: 1.5% for 15 min
    • Sporicidal (C. difficile): 1.5% for 60 min
Application Procedure:

Fully dissolve granulate in water to the desired concentration. Immerse dismantled and cleaned instruments fully into the solution for the recommended contact time. Rinse thoroughly after disinfection.

Special Advice:
  • For professional use only
  • Not suitable for base metals like brass and corrosive steel
  • Protect from heat, direct sunlight, and humidity
  • Do not mix with other substances
  • Not suitable for blood contamination removal
Physical and Chemical Properties:
  • Appearance: Whitish granulate
  • Scent: Neutral
  • pH-value of a 1% solution: 3.0 – 5.0
Manufacturer Information:

ANTISEPTICA Dr. Hans-Joachim Molitor GmbH, certified according to EN ISO 13485 and meets Directive 93/42/EEC on medical devices.

See more

Catalog excerpts

Oxygenon-I-1

Granulate for the manual disinfection of medical instruments based on active oxygen Spectrum of efficacy: • bactericidal • yeasticidal • tuberculocidal • virucidal • sporicidal Listing: • VAH-list • Storz-list Fields of application: Acute diarrheal diseases are often caused by the sporulating bacterium C. difficile. To interrupt the chain of infection at an early stage, sporicidal disinfectants, e.g. based on active oxygen, have to be used for the manual reprocessing of surgical instruments. The advantage of active oxygen is not only the extremely broad microbicidal spectrum of efficacy, but also the low impact on humans and the environment due to the breakdown of the active ingredients into non-toxic substances. Oxygenon-I is a disinfectant (acc. to the CDC Guideline for Disinfection and Sterilization in Healthcare Facilities, 2008) for the manual re-processing of instruments, laboratory equipment and medical device such as tracheostomy tubes, holding chambers etc. It is also suitable for the treatment of pneumotachographic equipment such as sieves, mouthpieces and tachographs or of tonometer and other. The product can be used for the disinfection of medical devices made of glass, porcelain, plastics, ceramics, and precious metals, e. g. stainless steel or intact chromed surfaces, as well as for thermostable and thermolabile anaesthesia equipment and rigid or flexible endoscopes. Oxygenon-I is suitable for the use in ultrasonic baths in a concentration of 1.5 %. Keep a contact time of 15 minutes and a water temperature of maximum 25 °C. Follow the instructions of the manufacturer concerning frequencies and further recommendations for use. Special characteristics: • very broad spectrum of efficacy • high material compatibility (incl. sensitive materials like acrylic glass) • no toxic residues • low impact on the environment • rapidly dissolvable without long stirring • free of conventional active ingredients like aldehydes, QACs, alcohols or chlorine Composition (active ingredients): 100 g contain: 60 g Caroat Recommendations for use: Test Concentration Contact time VAH - Instrument Disinfection | DGHM Standard Methods The company is certified according to EN ISO 13485 and meets the Council's requirements of Directive 93/42/EEC on medical devices. ANTISEPTICA chem.-pharm. Produkte GmbH A-1020 Wien, Handelskai 388 / Top 641 Tel.: +43-1-374 66 00, Fax: +43-1-374 66 00-66 E-Mail: [email protected], www.antiseptica.at ANTISEPTICA ANTISEPTICA Dr. Hans-Joachim Molitor GmbH Legal successor of ANTISEPTICA chem.-pharm. Produkte GmbH D-50259 Pulheim, Carl-Friedrich-Gauft-Strafte 7 Tel.: +49-2234-984 66-0, Fax: +49-2234-984 66-11 E-Mail: [email protected], www.antiseptica.com

 Open the catalog to page 1
Oxygenon-I-2

Oxygenon-I Appearance: Scent: pH-value of a 1 % solution: Application: Manual instrument disinfection; immersion procedure: Fully dissolve granulate in water to the desired concentration specified in the recommendations for use (make use of dosage table and measuring cup). Immerse dismantled, opened and cleaned instruments fully into the prepared disinfection solution for the recommended contact time. Ensure that the entire instrument is fully submerged during the entire contact time and avoid bubbles and cavities. Cover disinfection trays. After the recommended contact time has elapsed, take...

 Open the catalog to page 2

All ANTISEPTICA catalogs and technical brochures

  1. Instruton E

    1  Page

  2. Ethisol®

    2  Pages

  3. Descocid®-N

    2  Pages

  4. Dermotan

    1  Page

  5. Dermo Safe

    1  Page

  6. Biguacid-S

    2  Pages

  7. Biguacid Plus

    2  Pages

  8. A°-Wipes

    2  Pages

  9. BIG SPRAY

    2  Pages

  10. ACRYLAN®

    2  Pages

  11. Dermo-Care

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.