Beer analysis
7Pages

Pressurized and Non-pressurized Analyzing Systems

The heart of Alcolyzer Beer ME is its patented, selective alcohol measurement: It utilizes a narrow, highly alcohol-specific range in the NIR spectrum to quantify the alcohol content in all types of beers. Basic configurations Optional modules for each production step Alcolyzer Beer Alcolyzer Beer Analyzing System Ana'yzing System PBA-B Generation M Alcolyzer Beer Alcolyzer Beer Analyzing System Analyzing System PBA-B Generation M PBA-B Generation M Capabilities at a glance: - Analysis of beers and beer mixtures - Analysis of low-alcohol and non-alcoholic beers - Analysis in...

Alcolyzer Beer Analyzing System Thanks to its modularity the Alcolyzer Beer Analyzing System is custom-tailored to your needs. Connect measuring modules for the analysis of additional beer-specific parameters such as the pH, color, or turbidity value and the system will exactly fulfill your requirements. Combining the system with an automatic sample changer enables handling of high sample throughput at the highest level of automation. One sample – all parameters Alcolyzer Analyzing Systems determine the alcohol content and further important QC parameters such as original extract, real...

Beer Analysis Throughout Production Final Analysis of Bottled Alcoholic Beverages Alcolyzer Beer Analyzing System Analyze your entire product portfolio ranging from non-alcoholic beer to low-alcohol beer and standard beer. Monitor your entire process – from wort analysis to the finished product. Manage high sample throughput easily with the help of the built-in sample changer. Benefit from selective alcohol measurement without the influence of other sample ingredients. Allow the built-in standard operating procedure to maintain the instrument’s performance automatically. Sample filling...

Conventional analysis methods require sample degassing before measurements as dissolved CO2 may falsify the measured density and other parameters. As the PBA-B Generation M system fills the sample into the measuring cells directly from the package, no sample preparation - no preheating, no degassing, no filtering - is required. PBA-B Generation M performs all measurements (alcohol, extract, CO2 and optionally O2, color, pH, and turbidity) in one cycle, with one single sample. It automatically corrects the influence of the dissolved CO2 on the measured sample density and...

1000 measuring values with/without camera pictures 4 x USB (2.0 full speed); 1 x Ethernet (100 Mbit); 1x CAN Bus; 1 x RS-232; 1 x VGA Interface: RS-232 C; Baud rate: 9600; Parity: none; Stop bit: 1; Data bits: 8 Environmental conditions (EN 61010) Indoor use only Air humidity 10 % to 90 % relative humidity, non-condensing Overvoltage category Temperature control Integrated Peltier thermostat Temperature control, turbidity Sample volume Typical measuring time per sample * For more information please contact your Anton Paar representative Additional Specifications - PBA-Generation M

© 2017 Anton Paar GmbH | All rights reserved. Specifications subject to change without notice. XDLIP017EN-F