Domus Series
16Pages

Domus series Pressure Redistribution System Care for a Healthy Life

Apex Medical Corp. Product Selection Guide Replacement Mattress System May be used with frequent monitoring and care Overlay Mattress System Domus Auto 5” + 3”or 8” Mattress risks of pressure ulcer with increasing product performance *All staging guide images are from Natioanl Pressure Ulcer Adviso

Domus is a series of therapeutic support surfaces Auto Adjustment Automatically adjust the internal pressure of the air cells in response to individual body weight, distribution and posture, maintaining high level of comfort and optimal pressure redistribution and relieving the burden of caregivers. designed for a wide range of conditions from prevention to treatment of pressure ulcer. With evidence-based development, each Domus model is verified by Dynamic Pressure Mapping Test to Alternate Mode Continuously and sequentially inflate and deflate air cells to mimic natural sleep movement...

Apex Medical Corp. Comprehensive Care Ultimate Comfort

Low Air Loss Provide good ventilation and help reduce the accumulation of heat and moisture. Spring-Loaded Tube Inside the air tubes, springs are installed to prevent any kinks or unwanted bending on the tubes that connects pump and mattress to maintain consistent smooth airflow. Easy-to-use Quick Connector with cap Mattress can be transformed from a powered support surface to a sealed static air mattress, providing a uniform stable surface for patient transportation. CPR Straps These CPR straps are designed for quick release, single-handed facility located on the mattress side that enable...

Apex Medical Corp. Domus 1 Domus 1 is ideal for prevention and treatment of patients at low risk of pressure ulcers. This light weight and compact alternating pressure pad is composed of 2.5”-height bubble cells, and it is used as an alternative for heavier products such as gel overlay mattresses. The system is great for short term usage and easy to install. With a pressure adjustable pump and extension flaps on top and bottom sides of the bubble pad to prevent the pad from sliding, Domus 1 is designed to be a great transition mattress for homecare. Adjustable Hangers Suitable for most bed...

Patient : 170 cm / 80 kg / Male Inflation of A cells Specifications Model Dimension Case Material Supply Voltage Operating Cycle Mattress Dimension Cell Height Maximum Patinet Weight s Flame Retardant Standards *The airflow output and cycle time may vary slightly due to different electrical voltage and frequency. o *Domus 1 should always be used directly on top of an existing surface or an additional foam. ting *Always cover the pad with a sheet of clothing to avoid direct skin contact. ec

Apex Medical Corp. Domus 2 Domus 2 is a valuable overlay system tem designed for prevention and treatment of t patients at low to medium risk of pressure sure ulcers. By having a series of individual cells ells inflate and deflate alternatively cycles, the pressure is periodically redistributed by inflating and deflating cells in order to mimic mic natural sleep movement patterns and avoid void long term pressurization of tissue. Pillow Function Tubes in the “C-section” are designed to simulate a pillow function which also helps with patient compliance. Weight Indicator Reference To...

Patient: 170 cm / 80 kg / Male Inflation of A cells Specifications Model Dimension Case Material Supply Voltage Operating Cycle Mattress Dimension Cell Height Cover Material Cell Material Maximum Patient Weight Flame Retardant Standards *The airflow output and cycle time may vary slightly due to different electrical voltage and frequency. *Domus 2 should always be used directly on top of an existing surface or an additional foam. *Wider size 90 cm in width is also available

Apex Medical Corp. Domus 3 The Domus 3 is an effective alternating overlay system combined with static therapy mode. By having a series of individual cells inflate and deflate alternatively in cycles, patients receive their adequate pressure relief. y g procedures including dressing changes and g g The system can be switched to a static mode to facilitate all kinds of nursing p ent patient repositioning silver-ion Nylon/PU cover is also available to increase the antimicrobial effect. With clear weight ator indicator reference dial adjustment, Domus 3 is easy to use and is recommended for...

A. Antimicrobial Silver+ Nylon / PU Cover Vapor permeable and water resistant cover with a level of low fire retardancy and anti-MRSA effect. B. Nylon/PU Cover ( Optional ) Vapor permeable and water resistant with basic flame retardant level. Silver-ion Treated Flame Resistance Quick Connector with Cap Provide a uniform stable surface for patient transportation, nursing procedures, and moving and handling. Water Resistance Vapour Permeable Z i p p e r- A l l - A r o u n d Cover Reduce ingress of unwanted fluid and can be completely removed for laundry. Ventilated Low-AirLoss Cells Wicks...

Apex Medical Corp. Domus 4 Domus 4 is one of the advanced systems in Domus series. The digital multi-mode pump is not only offering alternating pressure redistribution, but also has a static mode with constant low pressure reduction. In alternating mode, the pressure is periodically redistributed by inflating and deflating cells in order to mimic natural sleep movement patterns and avoid long term pressurization of tissue. In constant static mode, the pressures is about 2/3 lowered when compared to the same pressure level from alternating mode by the means of immersion and envelopment. The...

Case Material Supply Voltage Operating Cycle Cell Height Cover Material Cell Material Maximum Patient Weight Flame Retardant Standards Silver Nylon/PU •Narrow size 85 cm in width is also available. •Optional two-directional stretch cover is also available. •Domus 4 overlay should always be used directly on top of an existing surface or an add it ional foam 200 x 90 x 12.7 cm w / 3" high foam pocket Silver Nylon/PU*