SOLAR SIMULATION CHAMBERS Climate + Irradiance. Precisely Controlled.

SOLAR SIMULATION CHAMBERS WHY SOLAR SIMULATION? Real-world aging rarely happens from temperature or humidity alone. Combined stress — heat, cold, moisture and irradiance — accelerates and better represents material degradation. Aralab chambers let you program climate and light together, repeatably and traceably, to speed development and demonstrate compliance. Applications • Automotive — interior trim, polymers, adhesives, electronics, harnesses. • Photovoltaics — PV modules and components under controlled irradiance. • Materials & Coatings — polymers, paints, composites, packaging. Standards...

SOLAR SIMULATION CHAMBERS • Full-spectrum solar with OSRAM HMI 2500 W light source; 280-800 nm coverage. • Up to 1200 W/m2 at the sample plane (setup/distance dependent). • Climate envelopes for light-on and light-off operation. • ClimaPlus HMI with dedicated radiation controls; FitoLog data logging & reporting. • Optional pyranometer, UV radiometer, BST (Black Standard Temperature) surface probe. Standard Specifications Chamber volume ~1000 L Irradiance Up to 1200 W/m2 (reference area depends on setup) Spectrum 280-800 nm (UVA/UVB + visible) Climate (radiation OFF) —52 °C to +150 °C; 10-90%...

SOLAR SIMULATION CHAMBERS CONTROL, DATA & TRACEABILITY Program combined climate + irradiation profiles from the ClimaPlus touchscreen. Define ramps and dwells, set alarm limits and event triggers, and track all variables in real time. The FitoLog software suite records process data and states, streamlines reporting, and supports remote diagnostics. Optional closed-loop irradiance control with a pyranometer (e.g., Kipp & Zonen CMP10), UV sensors, or a BST surface temperature probe adds traceability to every test. WALK-IN SOLAR SOLUTIONS (ENGINEERED-TO-ORDER) When test articles are large or you...

SOLAR SIMULATION CHAMBERS 6 x 4 kW HMI multi-lamp array with closed-loop regulation through ClimaPlus. • Reference irradiance fields such as ~1.0 x 1.5m @ ~1.2m and ~2.5 x 1.0m @ ~1.65m. • Uniformity targets ±10% (optionally ±5% with mapping & adjustment). • Thermal load management sized to lamps and DUT; services engineered accordingly. • Integration and programming via ClimaPlus; data logging with FitoLog. • Stainless-steel interior and reinforced floor; perimeter drains. • Hybrid insulated panels; large access door (e.g., ~2000 x 2000mm). • Pass-throughs for instrumentation, inspection windows,...

SOLAR SIMULATION CHAMBERS i6 All performance points, irradiance field size and uniformity are validated per project during FAT/SAT with calibrated instrumentation. • Pyranometer (e.g., Kipp & Zonen CMP10) for monitoring or closed-loop control. • UV radiometer (UVA/UVB) for spectral band assessment. • BST black-standard temperature probe for representative surface temperature. Irradiance uniformity and temporal stability are verified during acceptance. Chambers include thermal/humidity protection, alarms and interlocks. Protective procedures, PPE and viewing filters are available to support safe...

SOLAR SIMULATION CHAMBERS I7] For environment simulation beyond irradiance, selected walk-in projects can integrate rain and snow systems. Using dedicated water/air atomizing nozzles and a programmable ClimaPlus profile, users can set intensity/time curves and synchronize with temperature/humidity cycles. Floors include peripheral drainage; ventilation speed is adjustable to suit the scenario. Typical test areas are defined during the project phase. • Power: 3-phase (regional variants); lamp power cabinets specified per system. • Cooling: air- or water-cooled condensers. • Water: demineralized...

Let’s meet! [email protected] www.aralab.pt T: +351 219 154 960 Configure your chamber /AralabChambers /company/aralab /user/AralabChambers /Aralab_ /aralabchambers Control the environment Your own clim