TESTINGTESTA 1.000 CT SUN CLIMATIC TESTING SOLAR RADIATION CHAMBER

TESTA 1.000 SOLAR RADIATION CHAMBER ARALAB is a company specialised in designing, developing, manufacturing and servicing of high quality climatic chambers and controlled environment rooms. Since 1985 we have been perfecting ways to create and control temperature, humidity, light, air flow and many other environmental conditions. Only the highest quality components are used to manufacture our chambers so customers can have the best equipment for their research and testing purposes. TESTA temperature and humidity testing chambers offer highly precise and reproducible conditions for climatic and...

TESTA 1.000 SOLAR RADIATION CHAMBER ‘REACH-IN’ ENVIRONMENTAL TEST CHAMBER

TESTA 1.000 SOLAR RADIATION CHAMBER 40 • TESTA TT / TESTA CT 1.000 SOLAR RADIATION CHAMBER © EXTERNAL DIMENSIONS (HxWxD) (mm) INTERNAL DIMENSIONS (HxWxD) (mm) 1. Standard refrigeration system is air cooled2. Services hub installation needs: 0 V2” demineralized water supply Condutivity: <50pS/cm , TDS <35PPM 0 20mm water drain at floor level female connection 3. • Electrical cabinet installation needs:Supply power ECP50: 400VAC, 50Hz, 32A / 3-Phase + Neutral + Ground Electrical protection: Circuit breaker 3 x 32A + N with 300mA differential Supply power ECP70: 400VAC, 50Hz (60Hz upon request),...

TESTA 1.000 SOLAR RADIATION CHAMBER EQUIPMENT DESCRIPTION PERFORMANCE Temperature range Min Max Humidity range Humidity Fluctuation Temperature Range (in Climatic Testing) Humidity Range Performances measured in the center of the test area, chamber empty and stable, protected from heat radiation, and dependent on climatic set-points TEMPERATURE AND HUMIDITY CONTROL TEMPERATURE SENSORS • One (1) PT 100 Class A, located in air treatment tunnel • One (1) PT 100 Class A, movable sensors for flexible placing inside chamber HEATING • By stainless steel electric heaters located in the air treatment...

TESTA 1.000 SOLAR RADIATION CHAMBER Interior: AISI 304 hermetical welded, vapour tight, stainless steel Exterior: Zinc mild steel with epoxy coating finish (color RAL 7035) Insulation: Rock Wool Interior illumination: available with optional observation window Door: Double silicone joints and anti-condensation heating frames (optional window) • Air Flow: Forced through 2 ventilators/fans. • Air Renovation: By lateral port, also for compensating pressure. CUT-OFF PANEL, SECURITY AND COMMUNICATIONS On left lateral panel of the chamber and equipped with: High / Low safety thermostat Mains Power...

TECHNICAL DESCRIPTION OF THE SUN SIMULATION SYSTEM Irradiation Area - approx. 600 x 700 mm Distance from radiation-sample 650 - 800 mm The irradiance of our simulator adheres to the global spectrum in accordance with AM1.5. The spectral match of this sun simulator complies with both IEC 60904-9 and DIN 75220 standards. Transmission of Proportion of total Proportion of 4 mm thick glass radiation behind 4 mm total radiation % pane % thick glass pane % Non-uniformity Our solar simulator ensures a non-uniformity level of less than ±10%. The temporal instability of the solar simulator meets the standards...

TESTA 1.000 SOLAR RADIATION CHAMBER Pj ELECTRONIC POWER SUPPLY (EPS) The lamps in our system are powered by electronic power supplies, specifically designed for use in solar simulation systems. These power supplies are equipped with a constant regulation function to stabilize the output power. The selected irradiance power is consistently regulated through the adjustment of lamp voltage and lamp current. These power supplies guarantee a power factor of 0.98. Technical data Mains connection Input power Power factor Max. Output current Open circuit voltage Output frequent Lamp connection Test voltage...

TESTA 1.000 SOLAR RADIATION CHAMBER ACCESSORIES OPTIONAL SENSORS Pyranometer For the measuring of the irradiation power one pyranometer of the type Kipp & Zonen CM4 is included in the offer. The pyranometer CM4 is high temperature resistant (+150°C) and can be placed on the test vehicle during the whole test duration for closed loop regulation. The pyranometer can be connected to a connection box inside the chamber. A data amplifier will be delivered together with the sensor. Specifications Spectral range (50% points) Sensitivity Response time Zero offset A Zero offset B Directional response...

TESTA 1.000 SOLAR RADIATION CHAMBER CLIMAPLUS HMI CONTROLLER Programmable PLC exclusively developed for Aralab chambers. Multi-language, easy-to-use touch-screen interface (EN, FR, DE, IT, PT, ES and other languages on request). Resolution of 0,1ºC for Temperature and 0,1% for Relative Humidity. High performance temperature and humidity control with value correction in all ranges. Capability for creating 50 programs of 50 segments each. Internal non volatile memory for storing test data. Automatic restart of tests due to power failure, without losing data and restarting test where it was interrupted....

TESTA 1.000 SOLAR RADIATION CHAMBER FITOLOG SOFTWARE The FitoLog software pack is a set of applications designed to facilitate the managing, monitoring and recording of programs and data from the TESTA chambers. It consists of 3 applications: FitoLog, FitoLogView and FitoProgram. FITOLOG Records and displays in real time all data and details related to the set-points, running variables and equipment behaviour. It also retrieves information about the active components of the chamber, running processes, errors, alarms and allows the configuration of periodic or alarm triggered remote notifications...

Let’s meet! [email protected] www.aralab.pt T: +351 219 154 960 Configure your chamber FACEBOOK-SQUARE/AralabChambers Linkedin/company/aralab youtube/user/AralabChambers SQUARE-X-TWITTER/Aralab_ /aralabchambers Control the environment Your own cl