ARCOMA X-RAY CUBE Self supporting X-ray system for quick and temporary needs. Quick installation Self-supporting REV VER. 1 Can be installed in temporary hospitals REVISION NOTE CHANGE REQUEST The Arcoma X-ray Cube is a self-supporting solution that enables quick installation of an X-ray system in, for example a temporary hospital or in rooms where the ceiling is too low or not strong enough to support a standard installation Set-up of this system can be done in less than 24 hours and it´s also quick to take down or move when the needs change. Manufacturing info. Remove all burrs and break sharp edges. All dimensions apply before surface finish. Unless otherwise specified dim. are in mm Mod.-nr mtr dim Checked by - date This drawing is ARCOMAS property and shall not be copied or shown to third person without ARCOMAS permission If nothing else stated: Article No./Comm./Reference The Arcoma X-ray Cube is delivered with Arcoma Intuition X-ray system and detectors from Canon. The installation cube comes in two heights – 2,5 m (8’ 3”) or 2,8 m (9’ 3”). JHE Part number

SPECIFICATIONSTWO DIFFERENT VERSIONS The Installation cube is available in two different versions: • Version 1 is intended for really small rooms and requires, only 2.5m (8'3") ceiling height. • Version 2 gives you an increased stroke in the z-direc-tion for rooms with ceiling height of 2.8m (9'3") or more. The length of the stroke of the ceiling-suspended x-ray tube: