1. Catalogs
  2. Arjo
  3. Maxi 500®

Maxi 500®

Maxi 500®

Maxi 500®

Product catalog summary
Overview: The Maxi 500® is a mobile passive sling lifter designed to assist caregivers in transferring dependent patients in various healthcare settings. It is suitable for use in hospitals, nursing homes, homecare environments, and assisted living centers.
Specifications:
  • Lifting Capacity: Safe working load of 227 kg (500 lb).
  • Dimensions: Max lifting height of 1860 mm (73 1/4 in) and min lifting height of 650 mm (25 5/8 in). Lifter length is 1140 mm (44 7/8 in).
  • Weight: Lifter weight with spreader bar and battery is 57 kg (126 lb).
  • Protection Class: Lifter protection class IP24 and hand control protection class IPX7.
  • Battery: 24V, 4 Ah with charge indicator and service meter.
Key Features:
  • Dual Controls: Operable from the mast or with a hand control, allowing caregivers to stay close to the patient.
  • Adjustable Leg Chassis: Facilitates access for patients transferring to wide chairs, wheelchairs, or toilets.
  • Low-Friction Castors: Rear castors with brakes secure the lifter during storage and lifting.
  • Optional Scale: Integrates weighing into transfer procedures, eliminating the need for additional transfers.
  • High-Friction Solution: Reduces swinging of the spreader bar during transfers.
Accessories:
  • 2-point loop spreader bar
  • 4-point manual dynamic positioning system (DPS) spreader bar
  • Wide range of special purpose slings and flites
  • Optional suspended scale
  • Arjo disinfectants
Space Requirements: The blue area indicates the minimum working area required for ergonomic use from one side, while the light blue area shows the extended working area needed for activities from either side.
Additional Information: Only Arjo designed parts should be used on the equipment. The company reserves the right to modify designs and specifications without prior notice.
See more

Catalog excerpts

Maxi 500®-1

MOBILE PASSIVE SLING LIFTER Maxi 500 floor lifter has been designed to help caregivers transfer dependent patients or residents in hospitals, nursing homes, homecare environments or other assisted living centres. D. Unable to bear weight through feet. Is able to sit if well supported. E. Difficulty maintaining sitting, hence might remain lying/partially lying in bed, and may only sit in a special supportive chair. Please contact Arjo for further information. • Lifting capacity Safe working load of 227 kg (500 lb). • Familiarity Spreader bar is available in 2-point loop configuration, or Arjo 4-point manual dynamic positioning system (DPS). • Dual controls Maxi 500 can be operated from the mast or with the hand control, enabling the caregiver to stay close to the patient while operating the lifter. • Simplicity Easy to understand and simple to operate. • Scale option Integrating weighing into transfer procedures can eliminate an additional transfer to a fixed scale, which makes the routine easier for both patient and caregiver. with people in mind

 Open the catalog to page 1
Maxi 500®-2

SCALE (OPTION) Optional suspended scale supports an efficient weighing routine. HIGH-FRICTION SOLUTION The friction solution reduces swinging of the spreader bar during patient transfers. LOW-FRICTION CASTORS Low-friction castors, the rear two with brakes to secure the lifter in position during storage and when lifting from the floor. DUAL CONTROLS In addition to the hand control, the powered features of Maxi 500 can also be operated from the control panel on the mast. ADJUSTABLE LEG CHASSIS The adjustable leg chassis, operated from the hand control, allows access for patients transferring to...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.