CPAP
16Pages

{{requestButtons}}

Catalog excerpts

CPAP - 1

CRITICAL CARE CPAP Systems Continuous Positive Airway Pressure

Open the catalog to page 1
CPAP - 2

Contents Face Masks & Headgear 02 Clariti PEEP Valves 03 Bi-Level Full Face Mask & Headgear 04 V2™ Face Mask & Headgear 05 CPAP Systems 06 NIV Systems 10 CPAP Components 11 MAXBlend™ Flow Generator 12 MaxVenturi™ Flow Generator 13

Open the catalog to page 2
CPAP - 3

CPAP Systems Continuous Positive Airway Pressure Continuous Positive Airway Pressure (CPAP) is used to administer fresh gas pressure to the spontaneously breathing patient. By opening more alveolar spaces, CPAP increases the number of functional airways, thereby reducing total resistance.This has been demonstrated in many chronic or acute situations, whether in the post-operative period or in home ventilation. CPAP Benefits: l l l l l l l Increases Functional Residual Capacity (FRC) Reduces the patient’s Work of Breathing (WOB) Maximises alveolar ventilation Maximises blood oxygenation and...

Open the catalog to page 3
CPAP - 4

Face Masks & Headgear Our CPAP face masks are double-ported with unidirectional valves to eliminate rebreathing and are fitted with an anti-asphyxia valve. Masks are also equipped with a pressure monitoring port to enable proximal readings. The clear crown ensures easy visibility and low dead space while the anatomically shaped, large volume, inflatable cu is designed to provide an eective, low pressure seal. Masks are available in 3 sizes; small, large and large deep to fit a wide range of patient profiles thereby ensuring a comfortable, secure seal. Our deluxe headgear is made from a...

Open the catalog to page 4
CPAP - 5

Clariti PEEP Valves Positive End Expiratory Pressure (PEEP) is used to maintain pressure on the lower airways at the end of the breathing cycle which prevents the alveoli from collapsing during expiration. Clariti PEEP valves are fixed valves made from a transparent material which enables monitoring of the patient’s respiratory rate and blockage assessment while a highly fluorescent valve facilitates observation of valve functionality. Key Features: l Transparent casing enables monitoring of patient’s l Fluorescent valve facilitates observation l Available in 7 sizes and colour coded l...

Open the catalog to page 5
CPAP - 6

Bi-Level Full Face Mask & Headgear Our Bi-Level face mask adjusts perfectly to the patient’s face preventing air leakage and the headgear is made from a soft, breathable fabric which encapsulates the entire head without covering the ears. The headgear has also been designed in such a way that it can be easily fitted by one person while emergency release straps allow for quick and easy removal. Key Features: l l l l Accessories l Face masks are also supplied with a unique nasal gastric tube adapter which provides a leak-free seal around the nasal gastric tube. Additional ports provide for...

Open the catalog to page 6
CPAP - 7

V2™ Face Mask & Headgear This mask with its soft face piece and lightweight design oers comfort, a wide range of vision and freedom of movement. A patented seal design with moulded ridges which conform to the contours of the face ensures a comfortable, secure seal. Headgear with easy release clips and adjustable straps make fitting this mask quick and simple. Key Features: The mask is supplied with a swivel elbow connector, vented or non-vented. Single use and reusable options are also available. l l Soft medical grade TPE l One piece mould design l Patented seal design allows mask to...

Open the catalog to page 7
CPAP - 8

CPAP Systems Our range of CPAP systems includes configurations for face mask CPAP, tracheal tube CPAP and dual CPAP. The following is only a representation of our oering in CPAP systems. Should you wish to design a system to meet your particular requirements please refer to the CPAP components section or contact your local representative. Face Mask CPAP System Code AMCPUK01042 Description Mask Size Small AB 2m 22M/15F TNEV - EERF 3140EC nedewS ,smetsyS a rahP 22F Fro xpirat t 22F 314 Face mask CPAP system, non-heated, length 2.0m with large, double-ported CPAP face mask, Breathoprene®...

Open the catalog to page 8
CPAP - 9

Tracheal Tube CPAP System Tracheal tube CPAP systems facilitate an eective transition from the ventilator to face mask CPAP, without having to remove the tracheal tube at an early stage. Code AMCP02000 Description Tracheal tube CPAP system, non-heated, length 1.6m with flow-by limb, suction-ported tracheal T-piece, 5cmH2O PEEP valve and safety valve. 7.6mm port 15cm H2O Safety valve Expirat t 0120 1.6m 0120 From 0.4m Expirat From 22F 5cm H2O PEEP valve 22M/15F Box Qty Code 20 AMCPUK01151 7.6mm port Description 1.6m Fro 0120 Expirat 0.4m 5.0cmH2O H PEEP valve 22M/15F AB 0.8m 22M/15F TNEV -...

Open the catalog to page 9
CPAP - 10

Dual CPAP System For face mask or intubated patients Dual CPAP systems enable change over from a tracheal tube set up to a face mask set up without the requirement to hold stock of separate assembled systems. l l l Dual systems come assembled in the tracheal tube configuration. To change the configuration to a face mask set up please amend as follows: l l l Code Replace sealing cap on patient T-piece Assemble PEEP valve to bottom port of CPAP mask Assemble adapter to top port of CPAP mask and connect inspiratory tubing to adapter Attach manometer line to spigot on CPAP mask Connect...

Open the catalog to page 10
CPAP - 11

CPAP Kits Our CPAP face masks, headgear and PEEP valves are available as kits ready for use in a variety of combinations and designed for use with our CPAP breathing systems. CPAP kits oer convenience, choice and reduced packaging. Below are some of our more popular combinations. Code AMCPUK01056 Description Large double-ported CPAP face mask with UltraSeal headgear and 5.0cmH2O PEEP valve. Box Qty 20 Code AMCPUK8882/004 Description Large double-ported CPAP face mask with Breathoprene® UltraSeal headgear and 5.0cmH2O PEEP valve. 22M morF taripxE 0210 5cmH2O H PEEP valve Box Qty 20 Code...

Open the catalog to page 11
CPAP - 12

NIV Systems Our range of NIV systems includes both nasal and oronasal masks suitable for a range of Bi-Level and NIPPV machines. Masks are available with or without CO2 venting. All mask configurations are available in bespoke kits with ventilator tubing. Code AMVC1792/092 Description Ventilator circuit, single limb, adult, non-heated, length 1.8m in smooth bore PE tubing with bacterial viral breathing filter. Box Qty Code 20 AMVC1792/016 Description Ventilator circuit, adult, single limb, non-heated, length 1.8m in smooth bore tubing with exhalation valve with double swivel plain patient...

Open the catalog to page 12

All Armstrong Medical catalogs and technical brochures

  1. Aqua NASE®

    2 Pages

  2. UltraKEEP

    2 Pages

  3. AquaNASE

    4 Pages

  4. Secura

    2 Pages

  5. AquaVENT

    9 Pages

  6. SAFE-Flow

    4 Pages

  7. Combi-flex®

    12 Pages

  8. AMSORB® PLUS

    20 Pages

  9. ultraclear

    6 Pages

Archived catalogs