Inner coating
1Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

Datasheet : Coating : Inner You r dreams. Wove n togeth e r. /A /\S/\HI INTECC Outer cable : Torque coil, ACT ONE, etc. Inner tube : Fluoropolymer and PEBAX layer The Inner tube is designed for internal coating applied to hollow cable tubes like ACT ONE, Torque coil, or Wire coil for adding lubricity, chemical isolation, or surface preparation to the inside of the hollow cable. Ideal for applications requires lumen lubricity, sealing, or chemical resistance, for customers developing a delivery system. Minimum wall thickness (including Fluoropolymer and PEBAX layer) *It depends on Inner tube ID as below, which is not include tolerance. Coating material (Fluoropolymer layer) - PTFE greatest lubricity and chemical resistance - PFA similar in chemical resistance to PTFE, but less lubricity - FEP similar to PFA, slightly less susceptible to water absorption than others - ETFE greatest strength and abrasion resistance End treatment of inner tube manually cut using utility knife End treatment of outer cable EDM cut, chamfering

Open the catalog to page 1

All Asahi Intecc catalogs and technical brochures

1. 

   Flexible Shaft

   3 Pages

2. 

   Inner tube

   3 Pages

3. 

   Variable Durometer tube

   3 Pages

4. 

   Multi layer tube

   1 Pages

5. 

   Variable Durometer Tubing

   1 Pages

6. 

   Braid-reinforced shaft

   3 Pages

7. 

   PTFE liner tubing

   1 Pages

8. 

   Product Lineup

   20 Pages

9. 

   Multilayer tubing

   1 Pages

10. 

    Torque rope

    1 Pages

11. 

    precoating tube

    1 Pages

12. 

    outer coating

    1 Pages

13. 

    Wire coil

    1 Pages

14. 

    ACT ONE

    1 Pages

15. 

    Torque coil

    1 Pages