Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. Asahi Intecc
  3. PTFE liner tubing
video corpo

PTFE liner tubing

PTFE liner tubing
1 / 1 PageView full catalog

PTFE liner tubing

Product catalog summary
Features
  • Ultra Thin Wall: Thickness ranges from 0.0003” to 0.0005” (8μm to 13μm).
  • Wall Tolerance: ±0.00008” (±2μm).
  • Inside Diameter: Ranges from 0.01” to 0.11” (0.3mm to 2.8mm).
  • Offers excellent lubricity and chemical resistance.
  • Supplied on a spool with a silver-plated copper-core mandrel, available in lengths up to 1500 meters.
Quality Control
  • Outer Diameter (OD) is monitored along the entire length.
  • Pin hole checks are conducted throughout the entire length, with markings at pin holes.
Tie Layer for Enhanced Adhesion
  • PTFE liner can be supplied with an etched or thin thermoplastic tie layer (8μm) to enhance adhesion.
  • Available in cut lengths or continuous-spooled lengths.
Other Options
  • PTFE lined tubing can be reinforced with materials such as SS304, tungsten, polymeric filament like 66PA, or PEEK.
  • Outer jacketing options include materials like Nylon, polyurethane, HDPE, LDPE, and others.
Product Benefits
  • The ultra-thin wall with tight tolerance maximizes the internal diameter (ID) or minimizes the outer diameter (OD), optimizing catheter liner performance.
  • The continuous-spooled process on a silver-plated copper-core mandrel streamlines production and reduces costs significantly throughout the catheter assembly process.
  • Ideal for smaller catheters, enhancing the efficiency of procedural delivery.
Specifications
  • Product: PTFE Liner
  • Datasheet Reference: Dip: PTFE liner
  • Date: October 26, 2020
  • Supplied on spool
See more

Catalog excerpts

PTFE liner tubing-1

Datasheet : Dip : PTFE liner PTFE Liner Actual Product image Our PTFE Liner features ultra thin wall (0.0003") with tight tolerance, maximize your ID or minimize your OD with our qualified catheter liner. The continuous-spooled process on the silver-plated copper-core mandrel realizes the streamlining and reduces cost significantly through the entire catheter assembly process. Ideal for the smaller catheter to enable the efficient delivery of procedures. Specifications Features - Ultra thin wall: - Wall tolerance: - Inside diameter: 0.01” – 0.11” (0.3mm – 2.8mm) - Excellent lubricity and chemical resistance. - Supplied on spool with silver-plated copper-core mandrel (lengths up to 1500 meter) Quality control - OD is monitored on the entire length - Pin hole check on the entire length (Marking at the pin hole .) Tie layer enhances Adhesion PTFE liner can be supplied with etched or a thin thermoplastic Tie layer (8μm) to enhance adhesion. Option of cut lengths or continuous-spooled lengths is available. Other options - We can produce PTFE lined tubing with reinforcements such as coil and braided with material including SS304, tungsten, polymeric filament such as 66PA, or PEEK. - Outer jacketing is also available in a variety of materials including Nylon, polyurethane, HDPE, LDPE, or numerous other m

 Open the catalog to page 1

All Asahi Intecc catalogs and technical brochures

  1. Flexible Shaft
    Flexible Shaft

    3  Pages

  2. Inner tube
    Inner tube

    3  Pages

  3. Variable Durometer tube
    Variable Durometer tube

    3  Pages

  4. Multi layer tube
    Multi layer tube

    1  Page

  5. Variable Durometer Tubing
    Variable Durometer Tubing

    1  Page

  6. Braid-reinforced shaft
    Braid-reinforced shaft

    3  Pages

  7. Product Lineup
    Product Lineup

    20  Pages

  8. Multilayer tubing
    Multilayer tubing

    1  Page

  9. Torque rope
    Torque rope

    1  Page

  10. precoating tube
    precoating tube

    1  Page

  11. Inner coating
    Inner coating

    1  Page

  12. outer coating
    outer coating

    1  Page

  13. Wire coil
    Wire coil

    1  Page

  14. ACT ONE
    ACT ONE

    1  Page

  15. Torque coil
    Torque coil

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.