Integrity tester for vials Non-destructive leak testing The ASC 7400F is a self-contained automatic leak tester for vials. It is suitable for manual operation, as well as semi- or fully automated inspection stations. It allows a quick, clean, dry inspection of the vials without altering these, without any risk of operator influence. User-friendly and ergonomic: A large high-resolution touch screen provides a clear user interface and allows a quick intuitive understanding of the instrument. Loading and unloading vials is very easy, the instrument provides the force required for the hermetic sealing of the test chamber. The ASC 7400F is designed to replace the destructive leak tests as prescribed by standards. Its high accuracy allows testing at the same or even finer levels than the traditional blue dye method. It quantifies the degree of integrity by actually measuring a value. The measurement is linked to national standards and allows full traceability. Benefits of testing with the ASC 7400F: Non-destructive test ✓ All tested (and passed) vials can return to production line to be sold => yield improvement and cost saving ✓ No need for disposal of tested vials and product => cost saving ✓ Speed: quick test, higher sampling frequency possible => better process control ✓ 100% test possible on critical batches => zero risk possible ✓ 100% test possible on rejected batches => allows saving of good products Physical measurement of leaktightness level ✓ ✓ ✓ ✓ The measured value is calibrated to a standard, linked to national standards Test results are not dependant on operator (attention, eyesight, concentration) Objective, automatic comparison against reject level => no interpretation required SPC (Statistical Process Control) possible => allowing closer process monitoring & quicker intervention in case of drift Traceability of results ✓ Test results are stored with time/date, output in csv format or pdf Batch Report ✓ Continuous measurement certification Implementation assistance: ✓ Assistance from ASC Instrument engineers in choosing transposition and calculation methods ✓ Manufacturing of calibrated vials with Certificate for process q

Integrity tester for vials ASC 7400F Pressure variation leak test This measurement allows the testing of the integrity of filled vials. The method involves (de)pressurising the chamber in which the vial is inserted, isolating it and measuring the pressure variation over time. The variation of the pressure indicates the level of tightness. Insertion of vial Closing of chamber (De)pressurisation Stabilisation (from thermal gas instability) Test (measurement of pressure variation) Results display Release (return to atmospheric pressure) Standard test pressure: -85 to +85 kPa (programmable) Other...