ASC 7400 F5
2Pages

Integrity tester for vials Non-destructive leak testing The ASC 7400F5 is a self-contained automatic leak tester for vials. It is suitable for manual operation, as well as semi- or fully automated inspection stations. It allows a quick, clean, dry inspection of the vials without altering these, without any risk of operator influence. 5 Vials are tested simultaneously for maximum efficiency (a single vial version is available as well). User-friendly and ergonomic A large high-resolution touch screen provides a clear user interface and allows a quick intuitive understanding of the instrument. Loading and unloading vials is very easy, the instrument provides the force required for the hermetic sealing of the test chamber. The ASC 7400F5 is designed to replace destructive integrity testing, while greatly improving efficiency. Its high accuracy allows testing at the same or even finer levels than the traditional methylene blue dye method. It quantifies the degree of integrity by actually measuring a value. The measurement is linked to national standards and allows full traceability. Benefits • Non-destructive, fast ✓ ✓ ✓ ✓ ✓ All tested (and passed) vials can return to production line to be sold => yield improvement and cost saving No need for disposal of tested vials and product => cost saving 5 vials tested in <10 seconds: higher test frequency possible => better process control 100% test possible on critical batches => zero risk possible 100% test possible on rejected batches => allows saving of good products The measured value is calibrated to a standard, linked to national standards Test results are not dependant on the operator (attention, eyesight, concentration) Objective comparison against reject level => no interpretation required: PASS or FAIL SPC (Statistical Process Control) possible => allowing closer process monitoring & quicker intervention in case of drift Test results are stored, output as csv file or pdf batch report Test campaigns, correlation studies to existing methods, standards Calibrated Reference vials with certificate for

Integrity tester for vials ASC 7400F5 Pressure variation method This measurement allows the testing of the filled vial integrity. The method involves (de)pressurising the chamber in which the vial has been inserted, isolating it and measuring the pressure variation over time. The variation of the pressure indicates the level of integrity. Insertion of vials Closing of test chamber (De)pressurisation Stabilisation (from thermal gas instability) Test (measurement of pressure variation) Results display Release (return to atmospheric pressure) Standard test pressure: -85 to +85 kPa...