Technical Datasheet MSDS Available on Request Photo Polymer for use in all FREEFORM systems PlasWHITE is the ideal choice for high resolution enclosure models that require a paint finish. With strong PP/ABS-like properties, PlasWHITE is the starter base polymer for our ‘Plas’ range of materials. With white being an ideal choice for components that require a paint finish, PlasWHITE is well suited. Suitable for: Master Marketing Models Jigs and Fixtures RTV Molds Mechanical Assemblies Concept Models Supplied in 500mL Material Packs containing: 1x 500mL Bottle of PlasWHITE Polymer 1x Build Tray Note: This is the only on-going consumable for a Pico 3D Printer Technical Data COLOR TENSILE STRENGTH ELONGATION AT BREAK ELONGATION AT YIELD FLEXURAL STRENGTH FLEXURAL MODULUS HARDNESS (SHORE D) VISCOSITY GLASS TRANSITION TEMPERATURE IZOD NOTCHED-IMPACT DENSITY WHITE 51.1 Mpa 6.58 % 8.40% 86.8 MPa 1910 MPa 82 Shore D 343 mPa s 84°C 4.97 kJ/m² 1.181 g/cm³ www.asiga.com Asiga, Freeform, Pico, Pico Printer, Composer, and the Outside the Box Logo are trademarks protected by national and international treaties. COPYRIGHT 2013 © ASIGA