IASO WASHER THE NEW MICROPLATE PREPARATOR DEVICE (FOR PRODUCTION AND TEST) 4 washing stations 3 indipendent microplates for station From a single strip up to a maximum of 12 microplates Independent shakers on each microplate 4 washing manifold with double dispensing Tanks on the machine with the possibility of centralized exhaust sunction DOUBLE DISPENSATION The use of manifold with 24 needles (8 for aspiration + 8 for dispensing washing solution + 8 for a single reagent in overflow control each) allows to optimize the work session. Thanks to its low-consumption of energy (200W consumption) and the chance to work directly with 24 Vdc, IASO-WASHER can work with solar panels or windmill blade power source. Can be installed on mobile unit. The software, entirely developed by A.S.T., allows a simple management of the processes. Wi-Fi remote full assistance Bi-Directional Host Connection through RS232 (ASTM 1394).

IASO-WASHER was designed as a modular system. The instrument is made up of 4 independent washing modules. Each washing module consists of 3 independent microplates with 3 shakers and a 24-needle manifold (8 for suction + 8 for dispensing of washing solution or H2O + 8 for dispensing asingle reagent in overflow control each). The tanks are located in the front of the instrument, facilitating loading / emptying by the operator. Each tank has a capacity of 5Lt. The tanks used are divided into: • 1 tank for dispensing the stop reagent • 1 tank for the washing solution • 1 tank for the cleaning solution...