high power and biostimulation laser therapy SCANNING APPLICATOR (optional) large, 7” inch color touch screen therapeutic encyclopedia with treatment description operation mode: program/manual power stabilization and adjustment the ability of treatment automatic repetition counter of laser applicator operation statistics of performed treatments automatic laser power measurement test list of favorite programs buzzer volume setting emergency laser stop key easy replacement of adapters independent parameter settings for both sources pilot beam indicating application area edition of user-defined programs self test – systematic control of the unit LASER THERAPY • built-in high power laser source – 808 nm/8 W and 980 nm/10 W • three application adapters: 1 cm2, 5 cm2, DILA • cooperation with: scanning applicators, cluster laser applicator and point probes • power adjustment • radiation modes: continuous, pulse and super pulse • duty cycle or pulse time setting • automatic treatment time calculation on the basis of treatment area • dedicated modes for operation with optical fiber applicators emitter power measured on output two available version with different powers 2-level power regulationj three ways of covering the treatment area: ellipsis, line and curves within rectangle boundaries automatic calculation of treatment time depending on the size of treated area scanner arm height adjustment range: 60 – 140 cm setting of the scanning head in two axes pneumatic actuator that holds the arm high quality wheels with brakes shelf for the controller and protective goggles POINT PROBES (optional) • diversified power: 80 mW for 660 nm and 400 mW for 808 nm • 4-level laser power adjustment • power stabilization of the laser beam radiation • frequency and duty factor settings • readiness rate and work signalization • dedicated mode for operation with optical fiber applicators CLUSTER LASER APPLICATOR (optional) • opportunity to operate with different modes: cluster R 5x40 mW, cluster IR 4x400 mW, cluster R+IR 5x40 mW + 4x400 mW or with single radiation sources • regulation of treatment parameters MANUAL MODE complet

TREATMENT PROGRAMS • simplification of the unit operation • treatment programs chosen by name • 50 programs for high power laser therapy treatment • 58 programs for point probes • 26 programs for scanning applicator • 55 programs for cluster laser applicator • 8 programs with Nogier frequency • 30 programs with Voll frequency • favorite program list for each applicator • illustrated therapeutic encyclopedia TREATMENT SEQUENCES • simplification of the unit operation TECHNICAL SPECIFICATION • radiation mode - continuous, pulse • waveform - rectangular, triangular (super pulse) • duty factor - 1...