Asynt - CondenSyn overview 2020 (issue 1)
1 / 2Pages

Catalog excerpts

Asynt - CondenSyn overview 2020 (issue 1) - 1

® The CondenSyn & CondenSyn MINI Waterless Reflux Condensers Simple, safe and no risk of flooding High performance Environmentally friendly Short pay-back time Available in the 3 lengths to suit all R&D scales, all with standard socket sizes Save money, save water, save the planet! The smart solution for everyone The average rate of water used in a condenser is 2 litres per minute. The water costs used below are at £1.22 per cubic metre supply and £1.56 per cubic metre waste which is equivalent to 0.28p per litre. This commercial rate cost is from a water supplier here in the UK, Anglian Water in March 2020. NEW adapter available to allow the CondenSyn to be used for distillation See details overleaf See table (below) for savings. Water used per day Cost per day Cost per month (working days) Cost per year (working days) Ask for a demonstration online/in your laboratory today!

Open the catalog to page 1
Asynt - CondenSyn overview 2020 (issue 1) - 2

CondenSyn & CondenSyn MINI Independent tests were performed by a leading UK University to evaluate the performance for safe use in their research and teaching laboratories. Evaluations were based upon a basic 350 mm effective length CondenSyn and a 250 mL round bottom flask with 150 mL of solvent. Solvent bp [°C] oil bath [°C] difference [°C] time [min] %-loss (total)* %-loss per hour *It is recommended that to prevent further losses a temperature differential is kept below 10 oC, especially when using solvents below 60 oC boiling point . “Since receiving the CondenSyn waterless condenser,...

Open the catalog to page 2

All Asynt catalogs and technical brochures