Specifications Measurement items One of Refractive Index (nD), Brix (temperature compensation according to sucrose solution), concentration (%) (temperature compensation according to samples), and temperature Measurement range Refractive Index (nD) 1.32000 to 1.55700, Brix 0.00 to 100.00% Minimum indication Refractive Index (nD) 0.0001 or 0.00001, Brix 0.1% or Brix 0.01% (by selection) Measurement accuracy Measurement temperature 5 to 100°C (Clean-in-place (CIP) up to 130°C for no more than 30 minutes) High and low limit settings High and low control limits can be set by the keys. Display items Refractive Index (nD), Brix, concentration (%), temperature (°C) Output items Either Refractive Index (nD), Brix or concentration (%), and temperature (°C) Output method Alarm output Open-collector output for high and low limit settings (alarm output) Power supply AC100 to 240V, 50/60Hz Detection section - Calculation display section (power supply 12V and RS-485) Length: standard 15m (maximum up to 200m) Cable Materials in contact with the solution Light source Prism: Sapphire Pressure resistance 1.0MPa (detection section) Relative humidity 5 to 40°C, 30 to 90%RH International protection class Detection section: IP66, Calculation display section: IP65 Dimensions and weight Detection section: 10.8×26.6×10.8cm, 3.3kg ,Calculation display section: 19.2×10×24cm, 3.3kg Physical Dimensions Detection section Stay a Step Ahead of Danger with In-line Process Refractometer Calculation display section All ATAGO refractometers are designed and manufactured in Japan. Headquarters: The Front Tower Shiba Koen, 23rd Floor 2-6-3 Shiba-koen, Minato-ku, Tokyo 105-0011, Japan TEL : 81-3-3431-1943 FAX : 81-3-3431-1945 [email protected] http : //www.atago.net/ ATAGO products comply with HACCP, GMP, and GLP system standards. * Specifications and appearance are subject to change without notice. TEL : 1-425-637-2107 [email protected] TEL : 91-22-2833-8038 / 8076 [email protected] TEL : 662-982-8718-9 [email protected] TEL : 55 16 3916-6000 [email protected] TEL : 39 2 36557267 [email protected] TEL : 86 20-38106065 info@atago-china

Preventive quality measures means inspecting the whole process. Continuous monitoring with a process refractometer. The PRM-IOOa works by measuring the light refraction between the prism on the detection section and the liquid running through the pipe where it is installed. This instrument can be mounted directly on the pipe or on a bypass. Process refractometers are indispensible in food, beverage and pharmaceutical plants for checking actual product, as well as serving to measure and control concentrations of industrial solutions such as cutting oils, quenches, and washes. The unit reads samples...

The PRM-100α will monitor every step Save money and prevent a bad batch! Example 1,000,000 units at $1 each Initial investments in refractometers can avoid wasting resources or a reputation-damaging recall! Stay a step ahead of danger That is the highest priority. I wanted my finished products to be consistently up to standards. Back then, we could never figure out what caused unsuitable batches. One day, we made a decision to track and keep any kind of data that could help us. That data showed us that even seemingly impossible mistakes can happen. To avoid any mistake, it is necessary to anticipate...

If the unit is installed into a vertical pipe, the current must flow upwards. There must be enough flow to continuously replace sample on the prism in order to ensure accurate readings. ATAGO reps will be happy to discuss options for mounting. Connection system Straight type We are using an in-line refractometer when diluting syrups. We can easily calculate the mixing ratio from the Brix reading, and control the flow using the alarm output for when the levels go out of spec. The refractometer allows us to monitor flow conditions in real-time. Before buying, they had us try a demonstration unit...