HERMOCLAMP TEMPERATURE CONTROL
2Pages

THERMOCLAMP TEMPERATURE CONTROL Heated Perfusion Pencil with Neoprene Sleeve Removed Accurate temperature control, rapid solution switching and fast wash-out. Easy luer-lock connections and manipulator mounting. Thermodynamic design maintains temperature with 5 ml/minute flow from both tips without any metal tubing. Temperature Sensors Included Separate chamber bath and Perfusion Pencil thermocouples included. ThermoClamp®-1 Temperature Control System • Combination inline heater plus multi-channel focal drug delivery Maintain bath temperature and rapid drug wash-out with a high-flow bath line while quickly switching 4-8 preheated solutions through the Perfusion Pencil.® Steady 37˚C at 5 ml/minute flow rates through both the bath line and tip. Advanced auto-tuning temperature lock Fuzzy logic PID software maintains chamber or reagent temperature to within 1˚C of setpoint or better. The ThermoClamp calibrates its own tuning for ideal temperature control - no need to guess "loop speed" settings. Dual-channel ThermoClamp®-2 Temperature Controller Designed for physiology research No metal anywhere in the flow path - unlike some competitors. Low noise for electrophysiology with internal and external grounding plus electrical isolation between liquids and heating elements. For simultaneous heating of Perfusion Pencil® inline heater and microscope stage. • Ready to use Includes everything you need for heated perfusion: power supply, temperature sensors, and inline heater with easy luer lock tube connections. See previous page for flow rates. See next section for syringe warmer to mini

You can have rapid switching, fast wash-out, and accurate temperature control at the same time. Set the ThermoClamp temperature from ambient to 50°C. A front-panel BNC provides an analog output of current temperature for recording. Different sizes of replaceable tips are interchangeable with our standard Perfusion Pencil. The tips have microliter dead volume for rapid switching. No messy water jacket is required, but the separate high-flow line is capable of heating a perfusion chamber with water jacket if desired. Do you need to change your prep's temperature over the course of an...