SISKIYOU accessories Outfit your entire rig with Siskiyou accessories. 3 Axis Shuttle System Shown in retracted position Chamber Shuttle System: 3 Axis One inch working travel in XYZ. Choice of 20, 40, 80, and 100 TPI adjustment screws. Magnetic coupling (pat. pend) allows quick withdrawal of perfusion chamber from working area. Perfusion Chambers: Horizontal, Vertical, Round The PC series perfusion chambers have embedded magnets that are conveniently located to retain perfusion plumbing and ground plugs. They are designed to fit into our 8090c fixed stage platform. A standard 22 mm cover slip is used to create the chamber bottom that is attached with vacuum grease, silicon, or parafilm. There are two plastic retention screws for added security. Both openings accept 13-mm round cover slips for cultured specimens. PC series chambers come in three styles: horizontal, vertical, and round. All models have two small but very powerful magnets located next to the input/output reservoirs and two more located closer to the recording chamber.

The 8090c perfusion chamber platform is specifically designed with the electrophysiologist in mind. With adequate mounting holes and a drainage trough around the perimeter for solution overflows. The 8090c is ideal for fixed stage electrophysiology setups. The drainage trough is designed to protect your expensive microscope optics by funneling the solution to the outer edge of the platform and down the drainage tube to a safe location. The chamber receiver is located off of center and accepts our PC series perfusion chambers. Clearance holes along the right and left hand edges allow mounting...