Patient Monitoring Solutions

Features • 8" color TFT LCD Screen (touch screen optional) • Portable, lightweight and sturdy design • Flexible parameters configuration for different clinical environments • Rechargeable Li-ion Battery (optional up to 12 hours uninterruptable work) • Big font and font color display setting • Spot-check and continuous monitoring mode • Selectable for Adult, Pediatric and Neonatal patients • Wired/Wireless CMS, support HL7 protocol to HIS • Barcode scanner support • Thermal recorder support • Graphical & tabular trend review • 48 hours holographic wave review for each patient

For Out-Patient Department, Spot-check, Transport, Ward and other Basic Monitoring. Configuration Optional Technical Specifications 8" color TFT LCD Screen, resolution: 800 x 600 Wave sweep speed: 6.25 mm/s, 12.5 mm/s, Diagnostic mode: 0.05Hz~100Hz Monitor mode: 0.5Hz~40Hz Surgery mode: 1Hz~20Hz Strong filter mode: 5Hz~20Hz CMRR >100dB Notch: 50/60 Hz notch filter can be set to on or off Differential input impedance >5 MQ Electrode polarization voltage range: ±400 mV Baseline recovery time <3 s after defibrillation (in monitor and surgery mode) Calibration signal: 1 mV (peak - peak), accuracy...

PAVO Vital Sign Monitor Technical Specifications NIBP Measurement method: Automatic oscillometric method Operating mode: Manual, automatic, continuous Measurement unit: mmHg/kPa selectable Typical measurement time: 20~40 s Measurement type: Systolic, Diastolic, Mean Measurement range (mmHg) Range of Systolic pressure: Adult 40-270 Pediatric 40-230 Neonatal 40-135 Range of Diastolic pressure: Adult 10-210 Pediatric 10-150 Neonatal 10-100 Range of Mean pressure: Adult 20-230 Pediatric 20-165 Neonatal 20-110 Measurement accuracy Maximum average error: ±5 mmHg Maximum standard deviation: 8 mmHg Resolution:...

Infrared Ear Thermometer (optional) Displayed range: 34~42.2 °C (93.2~108 F°) Operation ambient temperature range: 10~40 °C (50~104 °F) Accuracy for displayed temperature range: Phasein IRMA™ Sidestream CO2 (optional) Warm-up time: Full accuracy within 10 seconds Sampling flow rate: 50 ml/min (+/-10/min) Accuracy: ± (0.2% +2% of the reading) Measurement Range: 0 -15% Rise time: 200 ms, typical at 50 ml/min flow rate Total response time: within 3 seconds (with 2m Momoline sampling line) AWRR Range: 0-150 bpm AWRR Accuracy: ±1 breath Phasein IRMA™ Mainstream CO2 (optional) Measurement Range: 0-15%...

CETUS X12 Patient Monitor • 10 waveform display, up to 12-lead ECG analysis • Useful calculation (Hemodynamic, Drug Dose, Oxygenation, Ventilation) • Pacemaker detection • OxyCRGs screen • Wired/Wireless CMS, support HL7 protocol to HIS • SpO2 pulse-tone modulation (Pitch Tone) • MEWS (Modified Early Warning Score) • Graphical & tabular trend review (120 hours) • Rechargeable Lithium-Ion Battery (2600 mAh)

12.1”color TFT LCD screen, wide and flat screen design,ecnomic and reliable Configuration: ECG+SpO2+NIBP+2TEMP+PR+RESP, Li-ion battery Optional: Touch-Screen, 12-lead ECG, Masimo SpO2, 2/4/6 IBP, C.O., EtCO2, Multi-Gas, BIS, NMT, VGA, Thermal Recorder, Wired/Wireless CMS Technical Specifications Display 12.1” TFT (touch screen optional) Resolution: 800 x 600 Number of traces: 10 waveforms ECG Lead type: 3-lead, 5-lead, 12-lead ECG waveform: 2 channels, 7 channels, 12 channels Display sensitivity: 2.5 mm/mV (×0.25), 5 mm/mV (×0.5), 10 mm/mV (×1.0), 20 mm/mV (×2.0) Wave sweep speed: 6.25 mm/s,...

CETUS x12 Patient Monitor Technical Specifications NIBP Measurement method: Automatic oscillometric method Operating mode: Manual, automatic, continuous Measurement unit: mmHg/kPa selectable Typical measurement time: 20~40 s Measurement type: Systolic, Diastolic, Mean Measurement range (mmHg) Range of Systolic pressure: Adult 40-270 Pediatric 40-200 Neonatal 40-135 Range of Diastolic pressure: Adult 10-210 Pediatric 10-150 Neonatal 10-95 Range of Mean pressure: Adult 20-230 Pediatric 20-165 Neonatal 20-105 Measurement accuracy Maximum average error: ±5 mmHg Maximum standard deviation: 8 mmHg...

CETUS x15 Critical Care Patient MonitorFeatures • 15.6" High resolution TFT LCD Touch screen • 10 waveform display, up to 12-lead ECG analysis • Useful calculation (Hemodynamic, Drug Dose, Oxygenation, Ventilation) • Pacemaker detection • Aspect BISx module, NMT module optional • Wired/Wireless CMS, support HL7 protocol to HIS • SpO2 pulse-tone modulation (Pitch Tone) • VGA support external display • Graphical & tabular trend review (120 hours) • 48 hours full disclosure wave review for each patient

CETUS x15 Critical Care Patient Monitor Multiple parameter options satisfy the need for ICU, CCU, NICU. Configuration: ECG, SpO2, NIBP, TEMP, Resp, PR; Li-ion battery Optional: Touch-Screen, 12-lead ECG, Masimo SpO2, 2/4/6 IBP, C.O., EtCO2, Multi-Gas, BIS, NMT, VGA, Thermal Recorder, Wired/Wireless CMS Masimo SET® SpO2 Provides anti-motion and anti-low perfusion SpO2 measurement. Bispectrial Index™ by Aspect Monitor the level of consciousness of the patient under general anesthesia or sedation. provides BIS, SQI, EMG, SR, SEF, TP, PC value and EEG wave. Masimo Phasein IRMATM/ISA Sidestream/Mainstream...

Technical Specifications Notch: 50/60 Hz notch filter can be set to on or off Differential input impedance >5MΩ Electrode polarization voltage range: ±400mV Baseline recovery time <3s after defibrillation (in monitor and surgery mode) Calibration signal: 1 mV (peak - peak), accuracy ±3% RESP Measurement method: Thoracic electrical bioimpedance Rate: 0 – 150 bpm Measuring lead: Lead I, II Wave gain: ×0.25, ×0.5, ×1, ×2 Respiratory impedance range: 0.5-5 Ω Baseline impedance: 500-4000 Ω Gain: 10 grades Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s TEMP Accuracy: ±0.1 or ±0.2 °F (without probe) Measurement...