Auto Lock Mechanism
6Pages

{{requestButtons}}

Catalog excerpts

Auto Lock Mechanism - 1

Sterile Container System “Modular Auto Lock Mechanism” TÜRK PATENT ENSTİTÜSÜ - - - - - - - - - - - - - - - - - - - No: a2012 00715 DEUTSCHES PATENT- UND MARKENAMT - - - - Nr. 20 2013 100

Open the catalog to page 1
Auto Lock Mechanism - 2

Sterile Container System “Modular Auto Lock Mechanism” General Information About Modular Auto Lock Mechanism What is Auto Lock Mechanism? Auto lock mechanism is a heat-sensitive automatic locking system developed in order to ease sterilization control by R & D department. Modular auto lock system designed to be usable with different container systems which are belongs to different brands like shown below. This system has been developed in accordance with the requirements of sterilization to be used in a steam autoclave for our container systems. Auto lock is a system designed in reusable...

Open the catalog to page 2
Auto Lock Mechanism - 3

Picture 2 Open position The process of the system becoming inactive is as following: After sterilization process has been completed and container has been removed from the autoclave, the container and Auto Lock system are allowed to cool between 5 and 10 minutes. Then the red movable locking shaft is pushed back with the help of fingers (Picture 3). Thus, lid closure of the container ceases to be blocked and comes to opened position. When the container enters into each sterilization, these processes are repeated in the same manner. When the user sees that Auto Lock mechanism is activated...

Open the catalog to page 3
Auto Lock Mechanism - 4

Assembly and Disassembly of Modular Auto Lock Mechanism Modular Auto Lock Mechanism Plastic Washer locking Clamp Locking clamp should be removed from the groove before assembly. When you sure that product is snug, locking clamp should be placed through the arrow direction. Due to container model that system will be assembled plastic washer should be removed or stay in place. Then it should be placed to the container label part as shown picture. Please be sure that locking stamp is forwarded to the end of the clamp groove and it is locked. Lock mechanism should be in open position for the...

Open the catalog to page 4
Auto Lock Mechanism - 5

Sterile Container System “Modular Auto Lock Mechanism” What is Modular Auto Lock Mechanism? Auto lock mechanism is a heat-sensitive automatic locking system developed in order to ease sterilization control by R & D department. Modular auto lock system designed to be usable with different container systems which are belongs to different brands. This system has been developed in accordance with the requirements of sterilization to be used in a steam autoclave for our container systems. Auto Lock is a system designed in reusable property instead of disposable plastic products that are used as...

Open the catalog to page 5
Auto Lock Mechanism - 6

Sterile Container System “Modular Auto Lock Mechanism” Meeting Point For Surgery Organize Sanayi Bölgesi 55330 Kutlukent - SAMSUN / TÜRKİYE Tel : 90 (362) 266 66 80 pbx Fax : 90 (362) 266 98 44 pbx E-Mail : a y g u n @ a y g u n . c o m Web : http://www.aygun.com KA-5013-Y1 Copyright © Aygün Co., Inc 2014 All Right Reserved, Printed in Türkiye

Open the catalog to page 6

All Aygun Surgical Instruments catalogs and technical brochures

  1. PPE Products

    13 Pages

  2. KARINCA 206

    44 Pages

  3. KARINCA 208

    24 Pages

  4. Accessories

    17 Pages

  5. Window

    21 Pages

  6. Praxis 3

    20 Pages