ChemGARD® and ChemGARD®-RI (Radioisotope) High Performance Fume Hoods Feature Continuous Flow Bypass for Improved Performance. The Baker ChemGARD® is the Industry’s Only Fume Hood Which Carries the UL Classification. Baker ChemGARD® high performance fume hoods have been developed by experts in containment technology. Both ChemGARD® fume hoods employ unique airflow characteristics within a streamlined, unobstructed work area to provide uniform, energy-saving operation, minimizing backdrafts, turbulence and eddy currents. Underwriter Laboratories Classified Features ChemGARD® fume hoods are designed for unparalleled safety for critical laboratory applications. • The continuous flow bypass design substantially reduces roll effect, minimizes lingering concentrations above and behind the viewscreen, and reduces contaminant concentrations near the edge of the sash, reducing potential exposure hazard to personnel. • Combination horizontal/vertical sash maintains optimum face velocity while reducing the amount of exhausted conditioned air to approximately one-half the air of conventional cabinets with verticalonly sashes, resulting in significant energy savings. • Angled side-entrance, airfoil and radius work surface deliver undisturbed airflow to the work area with minimal turbulence. • The Airwatch II airflow monitor can be custom configured to meet a variety of laboratory safety requirements. • A mass airflow sensor monitors either face velocity or exhaust duct velocity, and activates an alarm if monitored flow drops below safe limits. • ChemGARD®-RI includes structural and fabrication enhancements developed specifically for use with radioisotopes. • Select from three optional base cabinets to suit any laboratory application. • All ChemGARD® electrical and plumbing services are fully installed and ready for easy connection for simple, cost-effectiv

General Construction Features The aerodynamic ChemGARD® design employs fixed air slots at maximum safety configuration to alleviate the need for cumbersome operator adjustments. • ChemGARD® construction materials are fireproof. • Top-suspended, 12" wide safety plate glass sash panels are easily removed for cleaning. • Unique internal baffle location minimizes retained vapors in work area. • ChemGARD® fits through standard doorways and, once installed, requires only a 2" aisle overhang. • Radius bottom airfoil minimizes turbulence. The continuous flow bypass design substantially reduces roll effect,...

Horizontal/Vertical Sash Offers Advantages ChemGARD® Design Features The ChemGARD incorporates a combination horizontal/vertical sash designed for energy savings, operator safety and convenience. • Combination horizontal/vertical sash provides a protective physical barrier with full vertical access to the work area when using either horizontal or vertical configuration. • Full vertical access allows easy installation of experimental apparatus. • Top suspended 12" wide safety plate glass panels are easily removed for cleaning. • Side panels are flush with bell mouth inlet for streamlined airflow;...

Options and Accessories For convenience, most options, accessories and modifications are factory installed and should be specified when ordering. Commonly requested options are listed below. For detailed information on accessories and modifications, contact The Baker Company. • Additional service fixtures (air, gas, vacuum, cold or DI water, steam) • Cold water gooseneck faucet • Distilled/DI water gooseneck • Vacuum breakers • Aspirator • Epoxy resin sink • Base cabinet (see below) • Stainless steel peg board • Tubular base stand • Vertical only sash • Cupsink • Stainless steel work surface Base...

To Order For ordering information, terms and conditions of sale, contact The Baker Company or visit The Baker Web site at www.bakerco.com for the name of your authorized Baker Company representative. Caution: The adequacy of this containment cabinet for the user’s personal safety, as with any containment cabinet, should be determined by an industrial hygienist or safety officer. Site preparation information, architectural drawings, detailed dimensions and purchase specifications are available. Summary Specification and Site Preparation ChemGARD® and ChemGARD®-RI High Performance Fume Hood ChemGARD®...

Customer Power Supply Junction Box Electrical Component Junction Box 333⁄4" B Sealed Fluorescent Light Fixture 59" Touch Pad Control Panel and Alarm Duplex Outlet Purchase Specifications ChemGARD® 1. Every fume hood design shall have a certified copy of the ANSI/ASHRAE-110 Fume Hood Performance Test available at the request of the purchaser. 2. The fume hood liner shall be constructed of 16-gauge, Type 304 stainless steel and can be epoxy powder-coated as an option. 3. The front columns shall have an ideal 40°angle with an aerodynamic shape on the airfoil, bottom edge of sash and the front edge...

Purchase Specifications ChemGARD®-RI 1. Every radioisotope fume hood design shall have a certified copy of the ANSI/ASHRAE-110 Fume Hood Performance Test available at the request of the purchaser. 2. The fume hood interior shall be constructed of 16-gauge, Type 304 stainless steel. 3. The front columns shall have an ideal 40°angle with an aerodynamic shape on the airfoil, bottom edge of sash and the front edge of the 1" thick stainless steel work surface. 4. Rear baffle shall be front removable with fixed rear exhaust slots. 5. The side wall and front columns shall be seamless, one-piece construction....

P.O. Drawer E, Sanford, Maine 04073 (207) 324-8773