BANDELIN Ultraschall seit 1955 Cleaning - Dispersing - Homogenising Cell disruption-Sample preparation

We are a family-owned company located in Berlin and meanwhile run in the third generation, specialised in development, manufacturing and sales of ultrasonic devices, the corresponding accessories and application-specific disinfectants and cleaning agents. A wide vertical range of manufacture, modern production lines and a motivated staff guarantee a high quality of the products. Our devices contribute to the success of our customers in the laboratory, medical, dental, pharmaceutical, industrial, craft as well as service. As early as 1955, our company began developing and manufacturing high-performance...

Process engeneering • Degassing of beer samples for analysis of alcohol contents, original wort, colour, pH value • Degassing of solvents for HPLC • Degassing of food samples from cans for analysis of stannous content • Test method for freeze-thaw resistance of concrete: CDF test - through sonication, loosely adhering scaled particles are removed from surface • Extraction of quaternary ammonium compounds (QAC) of wood • Extraction of herbs samples for determination of aflatoxines (causing mold decay on food) • Extraction of soil samples for determination of hydrocarbons • Production of emulsions,...

■ More information about ultrasonic baths from page 6 to 9 you within the appropriate data sheet on our website: www.bandelin.com/downloads ^ Capacity [l] Time setting [min] Safety shut-down Heating Adjustable temperature range [°C] Excess temperature signal Protection against boiling retardation Setting accuracy of bath tempe rature [K] Thickness tank [mm], material C-Version: Filling mark for safe dosage Hard chromium-plated One-piece drain, welded Degree of protection Ultrasonic frequency [kHz] SweepTec Pulse function Power setting Oscillating systems Fast degassing DEGAS Mains supply: 230...

Advantages • Fixed mains cable: prevents danger of short-cut • Welded one-piece-outlet pipe for good tightness • Turning knobs for slight transmission Corresponds to 4 times ultrasonic nominal output Internal tank dimentions l x w x d [mm]

Advantages • Foil front panel with for easy hygienic cleaning • Fixed mains cable: prevents danger of short-cut • Welded one-piece-outlet pipe for good tightness Corresponds to 4 times ultrasonic nominal output

Type DT 102 H-RC DT 255 H-RC DT 510 H-RC DT 514 BH-RC Corresponds to 4 times ultrasonic nominal output

Stainless steel, for placing the parts to be sonicated, when choosing the device, it is important to consider the dimensions of the basket. With perforations, for gentle cleaning of sensitive surfaces, polyethylene, for placing the parts to be sonicated, when choosing the device, it is important to consider the dimensions of the basket. Stainless steel, for placing the parts to be sonicated, especially for laboratory flasks with larger diameters or large parts. Stainless steel, condensation water runs back into the tank, slots for carrying the basket handles. With lid. For working with chemicals...

3 Accessories – configuration examples Cleaning of parts placed into an insert basket directly in the ultrasonic tank Indirect cleaning of parts in a plastic tub when using either solvents or acids Indirect cleaning of small parts in inset beakers when using either solvents or acids

Handle adjustment GV for insert baskets and utensil holders Stainless steel, stepless adjustment of immersion depth, no overflow of labortatory flasks. Quick and easy to attach. GV 3: 2 pieces, suitable for baskets K 1 C, K 3 C/CL, K 5 C, K 6 BL GV 10: 2 pieces, suitable for baskets K 10/B, K 14/B, K 28/C, and in utensil holders GH 10, GH 14 and GH 28 Spring clamps EK for laboratory flasks Stainless steel, neither floating nor canting of flasks. Quick and easy fixing to the bottom of insert baskets or utensil holders, with mesh sizes up to 12.5 x 12.5 mm. EK 10 for 10-ml-laboratory flask...

SONOREX Special ultrasonic baths SONOREX DIGITEC DT ... FFlat ultrasonic baths with rapid degassing function and for sample preparationBasic sets: SONOREX DIGITEC DT 510 F, 1 flask holder GL 510 F, 250 ml TICKOPUR R 33 SONOREX DIGITEC DT 1028 F, 2 flask holders GL 510 F, 250 ml TICKOPUR R 33 • Uniform sonication of samples irrespective • Homogenising or rapid degassing of samples of size and arrangement of the flasks • Spring clamps EK 10 - 250 prevent floating or tilting • Reproducible results of laboratory flasks (see page 12) Corresponds to 4 times nominal output SONOSHAKE offers...

Gentle cleaning of analysis sieves Analysis sieves are test equipment with very high accuracy which are especially used in the fields of quality control in research and production. A thorough cleaning of analysis sieves is the basis for precise and reproducible results. Therefore, manufacturer of sieves recommend a cleaning of sieves by ultrasound. By cleaning in an ultrasonic bath, the particles are removed also from finest meshes (< 500 pm), contamination of the next sample will be prevented. There is no changing of mesh size and material tension. Not only analysis sieves can be cleaned effectively...

Special ultrasonic bath for cleaning of pipettes and burettes PR 140 D / DH Clean and particulary fatty-free glass surfaces are necessary for a correct volume measurement: The liquid to be measured must flow well down the glass wall and must not form droplets. Ready-to-operate set: • Pipettes washer PR 140 D or PR 140 DH • Inset basket K 140 B • Lid D 140 D • Cleaning concentrates TICKOPUR R 33 –  5 liters TICKOPUR TR 3  –  1 liter PR 140 D Code no. 2060 PR 140 DH Code no. 2065 Features • or re-useable volumetric glassware as well as long F parts up to 755 mm length • Optional heating (PR 140...

Special ultrasonic bath for sample preparation in reaction vessels DA 300 This compact ultrasonic bath with a very high power densitiy [200 W / l] is an essential equipment for the daily work in laboratories. It can be used for example for homogenising, solving and dispersing in food analysis and sample preparation for the subsequent analysis of industrial industrial sewage. We recommend our TICKOPUR cleaning agents for use as a contact liquid. The device DA 300 can also be used for cleaning small parts. The inset baskets KD 0 or PD 04 are the appropriate accessories (see page 10). Code no. 3460...