Specifications:
The LIFTERS T 165 AP is designed with a stroke tolerance of +/- 2mm, with operating speed varying based on load and voltage. The lifter type T 165 has a maximum push force of 800 N and a pull force of 400 N. It can handle a maximum static lengthwise load of 200 Nm and a dynamic load of 100 Nm. The lateral load capacities are the same as the lengthwise loads.

Design and Dimensions:
The lifter is a 2-stage version with a standard retracted length of 640 mm and a standard stroke of 495 mm. Custom strokes up to 700 mm are available on demand. The length is calculated as stroke + 145 mm. Fixing points are provided with 4 x M8 screws for both inner and outer profiles.

Electrical and Environmental Specifications:
The lifter operates at 24 V/DC with a maximum power input of 144 W and power consumption of 6 A. It includes a 1200 mm cable with an 8-pin MAS 80S plug type. The cycle duty is 1/9 (10%), suitable for environments with temperatures ranging from +10 to +40°C. The protection rate is up to IP54, and it falls under isolation class III.

Additional Features:
The lifter weighs 5.6 kg and includes integrated end switches. The pulse travel length is 0.319 mm/signal with a 2-Hall sensor.

Graphical Data:
The document includes a graph showing the relationship between current (I) in Amperes and force (F) in kN, as well as speed (V) in mm/s against force (F) in kN, indicating performance characteristics under varying loads.