*mymedicalexpo

LIFTERS TR 126

Product catalog summary

Overview: This document provides technical specifications for the LIFTERS TR 126 series, including models TR 126/2, TR 126/3, TR 126/3 MINI, and TR 126/3S MINI. It details their mechanical and electrical characteristics, operational parameters, and installation requirements.

Specifications:

Push and Pull Force: All models have a maximum push force of 800 N, except the TR 126/3S MINI which has 1500 N. The pull force is consistently 400 N across all models.
Lateral Load: Maximum static lateral load is 200 Nm for most models, with the TR 126/3S MINI supporting up to 300 Nm. Dynamic lateral load is 100 Nm, except for the TR 126/3S MINI which supports 150 Nm.
Speed and Stroke: Speed without load is 25 mm/s for most models, with the TR 126/3S MINI at 15 mm/s. Stroke varies by model, with custom options available.
Electrical Specifications: All models operate at 24 V/DC with a maximum power input of 144 W and power consumption of 6 A.
Environmental Conditions: Suitable for temperatures between +10°C to +40°C with a protection rate up to IP54.

Installation and Operation:

Fixing Points: Each model has 4 x M5 fixing points for both inner and outer profiles.
Cycle Duty: Operates on a cycle duty of 1/9 (10%).
End Switches: Integrated end switches are included in all models.

Additional Information: The document includes graphs illustrating the relationship between force and current, and force and speed for each model. It also notes that stroke tolerance and operating speed depend on load and voltage.

Catalog excerpts

Article number Max. lateral load statical Max. lateral load dynamical Speed (without load) Lifter version Max. stroke (custom made)** Retracted length (Standard) Stroke (Standard) Length/Stroke calculation Fixing points inner proﬁle*** Fixing points outer proﬁle*** Environment temperature Protection rate* Pulse travel length (2-Hall) Isolation class Stroke tolerance (+/- 2mm) and operating speed depending on load and voltage *Depends on installation position **Other retracted length/stroke/pull application on demand *** Screws self cutting/forming according to DIN 7500, thread depth min. L= 2,5 x D Controllers and add-on components see accessoires

Open the catalog to page 1

All Baumeister & Schack catalogs and technical brochures

Archived catalogs

LIFTERS VISOLIFT
2 Pages