Specifications:
The Actuator TYP 110 D is available in various spindle configurations: 10x3, 10x6, 12x12, 12x16, and 12x3. Each configuration has specific push and pull force capacities, ranging from 600 N to 1600 N. The speed without load varies from 5 mm/s to 25 mm/s, and the power rating is between 30 W and 80 W. The maximum stroke length ranges from 168 mm to 366 mm, with an overall length calculated as stroke plus 69 mm. The actuator operates on a voltage range of 12 to 36 V/DC, with a maximum power input of 200 W and power consumption between 1.5 A and 8.0 A. The cable length is 200 mm, and the cycle duty is 1/9 (10%). The operating temperature is between 0°C and 40°C, with a protection rate up to IP32, depending on installation. The isolation class is E, and the weight without spindle is 0.75 kg. Gear reduction is 1:62, and there are no integrated end switches.

Procedures and Recommendations:
The stroke tolerance is +/- 2 mm, and the operating speed depends on load and voltage. The protection rate is contingent on the installation position. Spindle bending is considered with a safety factor of SF=2. Controllers and additional components are available as accessories.

Graphical Data:
The document includes graphs showing the relationship between current (I) in amperes and force (F) in kilonewtons, as well as speed (V) in mm/s and force (F) in kilonewtons for different spindle types (TR 10/12 x 3, TR 10 x 6, TR 12 x 12, TR 12 x 16). These graphs illustrate the performance characteristics of the actuators under varying loads.