*mymedicalexpo

TYP 110 E

1 / 2 PagesView full catalog

TYP 110 E

Product catalog summary

Specifications:

Article Numbers: Various configurations based on spindle size, including 10x3, 10x6, 12x12, and 12x16.
Push and Pull Force: Maximum of 1600 N for certain models, with variations down to 600 N.
Speed: Ranges from 5 mm/s to 25 mm/s without load.
Power Rating: Between 30 to 80 W.
Voltage: Operates on 12 to 36 V/DC.
Max Power Input: 200 W.
Max Power Consumption: 1.5 to 8.0 A.
Cable Length: 1100 mm.
Cycle Duty: 1/9 (10%) in S3 mode.
Environment Temperature: 0 to 40°C.
Protection Rate: Up to IP32, depending on installation.
Isolation Class: E.
Weight: 0.75 kg for 100 mm stroke.
Gear Reduction: 1:62.
Integrated End Switches: Yes.
Stroke Tolerance: +/- 2 mm, dependent on load and voltage.

Procedures and Recommendations:

Ensure proper installation to achieve the specified protection rate.
Consider spindle bending with a safety factor of SF=2 for force specifications.
Refer to accessories for controllers and add-on components.

Graphical Data:

Graphs illustrate the relationship between current (I) and force (F), as well as speed (V) and force (F) for different spindle configurations.

Catalog excerpts

Actuator Article number Overall length 1 mm Length 1= Stroke Length 1= Stroke Length 1= Stroke Length 1= Stroke Length 1= Stroke Overall length 2 mm Length 2= Stroke Length 2= Stroke Length 2= Stroke Length 2= Stroke Length 2= Stroke Related to spindle bending at safety factor SF=2 Controllers and add-on components see accessoires Stroke tolerance (+/- 2mm) and operating speed depending on load and voltage Depends on installation position

Open the catalog to page 1

All Baumeister & Schack catalogs and technical brochures

Archived catalogs

LIFTERS VISOLIFT
2 Pages