Specifications:
The document outlines the specifications for two types of Visolift lifters: asymmetrical (VA260L700587HHH24) and symmetrical (VS260L460375HHAAD). Both models operate at a voltage of 24 V/DC with a maximum power input of 144 W and power consumption of 6 A. They feature a 3-stage lifter version with a standard retracted length of 587 mm for the asymmetrical and 375 mm for the symmetrical model. The maximum stroke is customizable up to 1000 mm for the asymmetrical and 700 mm for the symmetrical model.

Performance Parameters:
The maximum push force is 2200 N for the asymmetrical and 1500 N for the symmetrical model, while the pull force is 1100 N and 750 N, respectively. Both models can handle a maximum static lengthwise load of 1200 Nm and a dynamic load of 500 Nm. The static lateral load capacity is 450 Nm, with a dynamic capacity of 225 Nm. The speed without load is 12 mm/s for the asymmetrical and 15 mm/s for the symmetrical model.

Installation and Environmental Conditions:
The lifters have fixing points with 4 x M8 screws for both inner and outer profiles. They are designed to operate in temperatures ranging from +10°C to +40°C and have a protection rate of up to IP54. The isolation class is III, and the cycle duty is 1/9 (10%).

Additional Features:
Both models include integrated end switches and use a Molex Mini Fit Jr. plug type. The cable length is 1600 mm, and the pulse travel length per signal is 0.2268 mm for the asymmetrical and 0.1568 mm for the symmetrical model.

Contact Information:
For further inquiries, contact Baumeister & Schack at Martinstraße 6, D-72336 Balingen-Ostdorf, Tel.: 0 74 33 14 56-0, Fax: 0 74 33 14 56-50, Email: [email protected], Website: www.baumeister-schack.de.