BAUMER DRYING CABINET EA-34-03 BAUMER DRYING CABINET EA-34-03 SPECIFICATION Drying equipment intended to be used after washing pipes, hoses, metal instrumental, anesthetic accessories/ventilation glass, rubber, etc. Ability to hold up 48 tracheas. CONSTRUCTION Chamber, doors and body in stainless steel AISI-304 or 316 (optional) with brushed finish. Double walled equipment with openings on the top and bottom walls of the chamber for a perfect hot air circulation, in a way that the air has vertical laminar flow in order to circulate all over and inside the materials to be processed, obtaining, then, the perfect temperature homogeneity and fast heating. The air circulation takes place through fan located on top of the equipment. The internal chamber is completely sealed, in order to avoid infiltration of particles undesirable for the process, avoiding the risk of contamination. The chamber set is built in a structure of profiles reinforced in stainless steel. A Hepa with removal efficiency 99.97% for particles of 0.3 microns, easily removable for cleaning pre-filter and a filter in the air inlet guarantee a clean and heat air circulation. Cycle consists of controlled heating, programmable time up to 95 minutes. External Dimensions: Width: 875 mm TEMPERATURE The heating is done by a group of resistances in stainless steel, placed on the top side of the equipment. The temperature control system is done by a type "J" sensor, flexible, placed in the suction duct of the circulation air. The control is done through an electronic controller, allowing programming of temperature between 60SC and 95s C, with great precision. SAFETY The equipment has a motor protection circuit breaker that is activated if the engine is overloaded. A mechanic thermostat protects the electrical circuit, preventing the resistors to be still on and, consequently, from being damaged. When turned on again, the cycle returns to the beginning. The operator will have options to maintain the engine operating for longer, until the temperature falls to values lower than the parameter. It has a master switch for emergency case and/or to shut down the system. Length: 785 mm Height: 2065 mm Internal Dimensions: Width: 595 mm Length: 615 mm Height: 1415 mm Volume: 518 l Weight: 250 Kg Exhauster Engine Power: 1 hp Power Suply: 220 or 380 Volts Contact us for more details. Complete Kit: • 10 trays for packaging up to 20 baskets instrumental DIN (240x250x50mm). • 02 Supports for tracheas Adult. • 02 Supports for Children’s trachea. • 02 Ambu brackets. • 02 Supports for suction tubes. Baumer SA|Av. Prefeito Antonio Tavares Leite, 181 • Parque da Empresa • 13803-330 • Mogi Mirim • SP • Tel: +55 11 3670-0000 • Fax: 1+55 1 3670-0053 I www.baumer.com.br • e-mail: [email protected]