Overview
The Radiofrequency Puncture Generator is a specialized device designed for creating controlled punctures using RF energy, distinct from traditional cardiac ablation generators.

Safe and Effective Results
This generator is compatible with specific products such as the Nykanen Radiofrequency Puncture Wire, Toronto Transseptal Catheter, and PowerWire™ Radiofrequency Guidewire. It ensures controlled RF power output, minimizing trauma to surrounding tissues.

Simple Layout
The device is user-friendly, allowing control over time and power settings. It provides real-time monitoring of delivered power, impedance, and elapsed time during the puncture process.

Specifications

• Model Numbers: RFP-100-115, RFP-100-230
• Output Power: 25 watts maximum
• Operating Frequency: ~500 kHz
• Impedance Range: 100-7000 ohms (automatic shut off outside range)
• Timer: 1-99 seconds (Count-up, 1-second intervals)
• Weight: Approximately 9 kg (20 lbs)
• Dimensions: Width: 30 cm (12 inches), Length: 35 cm (14 inches), Height: 15 cm (6 inches)
• Power Cord Length: 3 meters (10 feet)

Warnings and Cautions
The generator is intended for use only with devices designed by Baylis Medical Company. Its use is restricted to or by the order of a physician as per Federal Law (USA).

Contact Information
Baylis Medical Company Inc., 5959 Trans-Canada Highway, Montreal, QC Canada H4T 1A1. Tel: (514) 488-9801, Fax: (514) 488-7209, Website: www.baylismedical.com, Email: [email protected]