PRESSURE METERS BC Biomedical DPM-2300 Series
PRESSURE METERS BC Biomedical DPM-2300 Series
- Large graphics display with cursor selection for options and setup.
- High resolution 24-bit measurement with ±0.05% FS pressure accuracy.
- Standard pressure scales include 13 different engineering unit ranges.
- Max and Min pressure value capture and storage.
- Digital calibration and selectable display options.
- Battery life display and programmable digital averaging filter.
- Software adjustable display contrast and digital zero adjustment.
- DPM-2302 model includes RS232 serial communications.
- Second pressure sensor for independent pressure channel and combined display option.
- Temperature option with YSI 700 or 100 Ω RTD temperature probe interface, ranging from -20.0 to 100.0 °C with ±0.5% FS accuracy.
- Analog output option with DC output proportional to displayed pressure or temperature, with ±0.1% FS output accuracy.
- Five standard pressure ranges with models available in any combination.
- Resolution varies by sensor, with the highest resolution at 0.00001 PSI for the 0.3 PSI sensor.
- Maximum overpressure varies by sensor, with the highest at 200 PSI for the 100 PSI sensor.
- Compatible with non-corrosive, non-ionic, or pure fluids and gases.
- Display: 128 x 64 pixels non-backlit graphical LCD.
- Construction: ABS plastic enclosure with back-printed Lexan overlay.
- Size: 7.69 x 3.97 x 1.80 inches; Weight: < 1 lb.
- Operating range: 15 to 30 °C; Storage range: -40 to 60 °C.
- Battery: 9V Alkaline with 80 hours continuous life.
- RS-232 communications with 115200 baud rate.
- Power consumption: < 35 mA when on, < 40 µA when off.
Catalog excerpts
Large Graphics Display With Cursor Selection Of Options And Setup High Resolution 24 Bit Measurement PRESSURE METERS Standard Pressure Scales Include 13 Different Engineering Unit Ranges MAX And MIN Pressure Value Capture And Storage Digital Calibration Selectable Display Options & Digit Sizes Battery Life Display (0 To 100%) Programmable Digital Averaging Filter Display Contrast Is Software Adjustable Digital Zero Adjustment Second Pressure Sensor Adds: ± Independent Pressure Channel Separate And Combined Display Option Temperature Option Adds: ± YSI 700 or 100 Ω RTD Temperature Probe Interface Analog Output Option Adds: ± DC Output Proportional to the Displayed Pressure or Temperature DPM-2300 The DPM-2300 Series is a microprocessor-based, High Precision, High Resolution Digital Pressure Meter Family. These meters measure both gas and liquid pressures and provide multiple engineering unit displays for the results. The unit may have one or two pressure sensors and an optional temperature sensor input to measure pressure and temperature all in one meter. There are five standard pressure ranges. Models are available with any combination of ranges. The DPM-2350 Subset provides a differential pressure option using a single sensor in any of the five ranges. Optional features allow the addition of RS232 communication, Temperature mea
Open the catalog to page 1
Phone: 314-638-3800 Toll Free: Email: [email protected] Website: www.bcgroupintl.com S iHuSPtl iJWmjl Ukt LlMH Lmlih .3 = W.IK 0.3 F>SI iDolrp-JI M.1<f Luu Locil >» ■ WlilO PSI iJ>hilT M*t Luff Lrnkl ttall. r ■ el C u uS<re r.-Xi&wjt M!t*ih» -So"ntti« HWTI A-Hiog CMfell SPECIAL MODEL: Recommended model for use with TSI Certifier-FA Respiratory Vent Test System
Open the catalog to page 2All BC Group catalogs and technical brochures
Safety Analyzer - Base Model2 Pages
Safety Analyzer - Lite Model2 Pages
UW6 Ultrasound Wattmeter2 Pages
Scale - 200g (Digital)4 Pages
- General care simulator
- Gas filter
- Medical device testing system
- Medical filter
- Control analyser
- Patient simulation unit
- Antibacterial filter
- Temperature testing system
- Portable simulation unit
- Monitoring simulator
- Artificial ventilation filter
- Flow testing system
- O2 analyzer
- Leak tester
- Pressure testing system
- Testing system with touchscreen
- Calibration analyser
- Continuous testing system
- Plastic simulator
- Kit simulator