Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure
1 / 5Pages

Catalog excerpts

Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure - 1

Deliver ultra-clean, purified, medical air Medical Air Systems – mAIR, cAIR and sAIR

Open the catalog to page 1
Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure - 2

When purity and precision are key The critical field of patient care requires ultra-clean medical air delivered to operating theatres and hospital beds with absolute reliability. A hospital’s medical air supply is a vital life support service, maintaining respiration of the critically ill during mechanical ventilation. As such, within Europe, ‘medicinal air’ is classified as a drug, and the concentration of impurities therein must be carefully controlled to ensure compliance with the European Pharmacopoeia monograph. Built to exceed standards, medical air systems are designed to provide...

Open the catalog to page 2
Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure - 3

stages of active purification Combined coalescing filter Oil and water aerosols removal Desiccant dryer Water removal Activated carbon towers Gaseous impurities removal Maintaining a consistently low dew point is critical to patient safety, and to the operation of air driven surgical tools. The dMED incorporates state-of-the-art energy management control with built-in purge control as standard. This purge control makes the dryers more efficient, leading to energy savings on purge losses of up to 90%, depending on installation and usage. Water separator Liquid water removal Built-in purge...

Open the catalog to page 3
Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure - 4

A Compressor solution for every need BeaconMedæs along with Atlas Copco continues to innovate and provide increased product solutions for the Healthcare sector. By making use of the wide range of compressor technologies available from Atlas Copco we can provide a bespoke modular system to suit your specific needs. Our medical range of compressors are provided with the Mk5 Elektronikon® controllers and CAN connections. All models are simple and easy to install and are pre-configured in our factory to communicate with the ES-MED central controller, which is included on our dMED dryer system....

Open the catalog to page 4
Medical Air Systems mAIR, cAIR and sAIR HTM/ISO brochure - 5

Regulate the pressure of your Air Plant Designed for use in medical applications, Pressure Reducing Sets lowers the output pressure of a surgical or combined air system to the required pipeline pressure. All components are fully duplexed allowing one side to be completely isolated for maintenance purposes, without interrupting the life supporting medical gas supply. The Duplex Pressure Reducing Set is easy to install with four mounted holes situated in the powder coated steel back plate. Models are available with different input and output pressures to suit the differing supply pressures...

Open the catalog to page 5

All BeaconMedaes catalogs and technical brochures

  1. Local alarm

    4 Pages

  2. Magnis MSV

    2 Pages

  3. mVAC

    12 Pages

Archived catalogs