ANKLE COMPONENTS
51Pages

RECKER ORTHOPEDIC * * A Tradition of Excellence A Commitment to Innovation ANKLE COMPONENTS Double Action Standard Action Dorsiflexion Assist Miscellaneous Stirrup , Thermoplastic Ankle Joints

DOUBLE ACTION ANKLE COMPONENTS Double Action Standard Action Dorsiflexion Assist Miscellaneous Stirrup Components Thermoplastic Ankle Joints for Plastic AFO/KAFO

ANKLE JOINT AND STIRRUP MATERIAL AND SIZE SPECIFICATIONS In the following five sections, Becker Orthopedic presents its complete line of ankle joint and stirrup products. These pages represent the largest selection of ankle components available on the market. Systems are available for double action, standard action, dorsiflexion assist, and a variety of joints for thermoplastic orthoses. Each joint is available in assorted sizes and materials. Four basic stirrup configurations are available in sizes from 4-1/2" to 11". This page is devoted to our material and size specifications, which will...

SLIM LINE DOUBLE ACTION ANKLE JOINTS Becker Orthopedic introduced the low profile Slim Line Double Action ankle joints in 1992. These joints allow the orthotist to choose an inside (SLI) or outside (SLO) recess on the joint. SLIM LINE WIDE FLANGE STIRRUP ONLY These stirrups may be used with any Slim Line ankle joint. Three configurations are available; each is made from 1/8" thick stainless steel with two 3/8" bushing holes. MODEL SL2800-A STIRRUP ONLY MODEL SL2800-X STIRRUP ONLY The unique “web” configuration makes this stirrup the strongest we manufacture. The tongue of this stirrup is 7"...

MODEL SL2810 SLIM LINE STIRRUP INSERT ONLY This unique Becker design is stamped in one piece with no welding for increased strength. Order No. SL2810-A2.25 SL2810-A2.5 SL2810-A2.75 SL2810-A3 SL2810-C1.8 SL2810-C2.0 SL2810-C2.3 MODEL SL2810Y SLIM LINE Y STIRRUP INSERT ONLY The “Y” shaped flanges are preferred by many orthotists. DOUBLE ACTION MODEL SLI/SLO-2825: SLIM LINE DOUBLE ACTION ANKLE JOINTS The joints below are shipped complete with bushing, screw, ball bearings, springs and hex set screws. When ordering please specify if you desire pins instead of springs. Slim Line ankle joints are...

MODEL SLI/SLO-2835 SLIM LINE DOUBLE ACTION ANKLE JOINT WITH ATTACHED UPRIGHT We attach the upright bar to the ankle joint to reduce your fabrication time. Sold individually. SLI *Model C8 and C8S come equipped with our Slim Line 2825-C ankle joint. NOTE: Any size upright in any joint on the preceding page can be made as a special item. Please allow 48 hours to manufacture special items. MODEL SL2845-A SLIM LINE ONE-PIECE ALUMINUM DOUBLE ACTION ANKLE JOINT AND UPRIGHT DOUBLE ACTION Dimensions Stainless Steel Joints Order No. with Aluminum Uprights SLI-2835-A4 1/4" x 5/8" x 15-1/4" Aluminum...

MODEL SLI/SLO-2850-A WIDE FLANGE STIRRUP WITH SLIM LINE DOUBLE ACTION ANKLE JOINTS This model includes our wide flange stirrup with 4-1/2" tongue and Slim Line Double Action ankle joints. Springs are included unless pins are specified. Available with stainless steel or titanium ankle joints. Please specify choice of inside (SLI), or outside (SLO) recess for upright attachment. DOUBLE ACTION NOTE: For Titanium ankle joints, add prefix “TI” to the order number, e.g., TISLI-2850-A9 (Titanium Slim Line inside recess ankle joints with 9" stirrup). MODEL SLI/SLO-2850-X WIDE FLANGE LONG TONGUE...

MODEL SLI/SLO-2850-SX: SLIM LINE WIDE FLANGE LONG TONGUE WEBBED STIRRUP WITH DOUBLE ACTION ANKLE JOINTS Model SLI/SLO-2850-SX has a unique web design, with 7" tongue, that makes it the strongest stirrup we manufacture. Springs are included unless pins are specified. Available with stainless steel or titanium ankle joints. Please specify choice of either inside (SLI) or outside (SLO) recess for upright attachment. SLI Order No. Stirrup Length SLI-2850-SX8 8" SLI-2850-SX8.5 8-1/2" SLI-2850-SX9 9" SLI-2850-SX9.5 9-1/2" SLI-2850-SX10 10" SLI-2850-SX10.5 10-1/2" SLI-2850-SX11 11" SLI SLO NOTE:...

SLIM LINE DOUBLE ACTION SPLIT STIRRUPS Ankle joints are supplied with springs unless pins are specified. Slim line split stirrup upright only DOUBLE ACTION MODELS SLI-2966 & SLO-2966 Foot Left Right Pair Left Right Pair Left Right Pair Slim line split stirrup uprights with caliper plate Slim line split stirrup with ankle joint Upright Size Dimension A 1/8" x 7/8" B 1/8" x 3/4" C 3/32" x 11/16" Foot Left Right Pair Left Right Pair Slim line split stirrup uprights with wide flange caliper plate Foot Left Right Pair Left Right Pair Left Right Pair Slim line split stirrups with ankle joints and...

ORIGINAL DOUBLE ACTION ANKLE JOINTS Lucille M. Becker, CO invented the original Double Action ankle joint in 1963 to achieve a precise, adjustable range-of-motion ankle joint that can allow both dorsiflexion and plantarflexion. Pins and/or springs may be used in a variety of combinations to limit motion and provide assistive force. MODEL 2800 WIDE FLANGE STIRRUP ONLY Becker Orthopedic introduced the wide flange stirrup to stabilize the forces on the foot and the ankle. Three configurations are available, each is made from 1/8" thick stainless steel with two 3/8" bushing holes. MODEL 2800-A...

MODEL 2900 STANDARD FLANGE STIRRUP ONLY MODEL 2900-A ADULT STIRRUP ONLY • 1/8" stainless steel • Two 3/8" bushing holes • 3.5" tongue Order No. 2900-A8 2900-A8.5 2900-A9 2900-A9.5 2900-A10 2900-A10.5 2900-A11 MODEL 2900-B YOUTH STIRRUP ONLY DOUBLE ACTION • 1/8" stainless steel • Two 3/8" bushing holes • 2.8" tongue MODEL 2900-C CHILD SIZE STIRRUP ONLY • 3/32" stainless steel • Two 5/16" bushing holes • 2.1" tongue MODEL 2810 STIRRUP INSERT ONLY This unique Becker design is stamped in one piece with no welding for increased strength. Y MODEL 2810-Y STIRRUP INSERT ONLY The “Y” shaped flanges...