HIP AND ALUMINUM THRUST BEARING JOINTS 1000 SERIES 2000 SERIES ALUMINUM THRUST BEARING JOINTS HIP AND ALUMINUM THRUST BEARING JOINTS

BECKER HIP JOINT SYSTEM Below you will find all material and size specifications for Becker hip joints. Please refer to the charts below for specifications on our hip joints, or call one of our customer service representatives with any additional questions you may have. This page is provided as a tool for orthotists in choosing the most appropriate hip joint for their patient’s needs. Material Specifications Product 1000 Series Midsections 2000 Series Midsections* Aluminum Uprights Stainless Steel Uprights Titanium Uprights** Upright Conversions Material 410 Hardened Stainless Steel 304-2B Stainless...

BECKER HIP JOINT SYSTEM CONTINUED Designed For: Bar Width Bar Thickness Bushing Hole Diameter 2000 SERIES Proximal Upright Length (from KC) A Size B Size C Size 10-1/4" 10-1/8" 10-1/8" 10-1/4" 10-1/8" 10-1/8" 4-3/4" 4-3/4" 4-5/8" ~ 6-3/4" 5" ~ 6-3/4" 5" ~ 6-3/4" 5" ~ 3-1/4" ~ Distal Upright Length (from KC) A Size B Size C Size 10" 10" 10" 10" 10" 10" 4" 4" 4" ~ 8-5/8" 7-1/8" ~ 8-7/8" 7" ~ 8-1/4" 6-7/8" ~ 3" ~ ALUMINUM THRUST BEARING SERIES A SIZE B SIZE *Adults 120# *Youths 50-120# 1 1/4" 1" 1/4" 1/4" 1/2" 1/2" * Discretion in choosing a joint size and designing an appropriate orthosis should...

HIP AND ALUMINUM THRUST BEARING JOINTS 1000 SERIES 2000 SERIES ALUMINUM THRUST BEARING JOINTS

MODEL 1020 RING LOCK HIP JOINT Model 1020 is the strongest locking hip joint we manufacture. It is recommended for large or extremely active patients. All midsections and uprights are made of stainless steel. Side Left Right Pair Left Right Pair Left Right Pair Model 1020 is also available with a straight proximal To order parts, please specify upright, instead of a “T” bar. To order, please add “S” the order number, followed by the part number you desire. to the beginning of the order number. • Shipped fully assembled • Do not remove rings MODEL 1022 MODIFIED RING LOCK HIP JOINT Model 1022 has...

MODEL 1022-I INFANT MODIFIED RING LOCK HIP JOINT Model 1022-I has been specially designed with very small midsections for use as an infant hip joint. The proximal and distal uprights are stainless steel. Order No. 1022-I8L 1022-I8R 1022-I8P Side Left Right Pair To order parts, please specify the order number, followed by the part number you desire. MODEL 1022-II INFANT MODIFIED RING LOCK HIP JOINT Model 1022-II has an even shorter midsection length than model 1022-I. The proximal and distal uprights are made of stainless steel. The proximal joint unit is both riveted and welded to the proximal...

MODEL 1023 TRIGGER LOCK HIP JOINT Model 1023 incorporates a lever mechanism which automatically engages the lock when the patient stands. All midsections and uprights are made of stainless steel. Side Left Right Pair Left Right Pair Model 1023 is also available with a straight proximal upright, instead of a “T” bar. To order, please add “S” to the beginning of the order number. To order parts, please specify the order number, followed by the part number you desire. • Shipped fully assembled MODEL 1025 FREE MOTION HIP JOINT Model 1025 is a free motion hip joint with a 180˚ extension stop. All...

MODEL 1026 ADJUSTABLE FLEXION RING LOCK HIP JOINT By using a serrated disc, the orthotist may increase or decrease the hip flexion angle by 6˚ intervals. All midsections and uprights are made of stainless steel. Side Left Right Pair Left Right Pair Left Right Pair MODEL 1030 ABDUCTION FLEXION HIP JOINT Model 1030 is manufactured of stainless steel, making it one of the strongest hip joints available. 1 Side Left Right Pair Model 1026 is also available with a To order parts, please specify the straight proximal upright, instead of a order number, followed by the part “T” bar. To order, please...

MODELS 1040 AND 1041 MILLENIUM HIP JOINT The Millenium Hip Joint is offered in two configurations. Both models feature stainless steel midsections and aluminum uprights. Model 1040 has slotted uprights. Model 1041 has drilled and tapped #10-32 attachment holes for use with our Quick Disconnect™ System. US Patent 6,203,511 • Can be used on the left and right sides • Range-of-Motion from 0˚ - 120˚ Flexion/Extension • Flexion/Extension adjustable in 10˚ increments • Abduction/Adduction adjustable in 9˚ increments 1040 • Shipped fully assembled 1041 • Shipped fully assembled • Tapped holes in proximal...

RECKER ORTHOPEDIC M-J A Tradition of Excellence A Commitment to Innovation BEARING JOINTS ALUMINUM THRUST BEARING JOINTS

2000 SERIES HIP JOINTS The 2000 series was added to our product line to create a cost-effective, reliable hip joint. Stainless steel side plates are riveted onto the proximal upright to form the upper joint unit. The distal bar is machined to fit into the upper joint unit. The absence of a lower joint unit allows the orthotist to make a rapid medial contour. MODEL 2020 ALUMINUM RING LOCK HIP JOINT Model 2020 is our standard ring lock hip joint. The proximal and distal uprights can be made of aluminum or stainless steel. Note: Nylatron washers are only required on models with aluminum uprights....

MODEL 2025 ALUMINUM FREE MOTION HIP JOINT Model 2025 is a free motion hip joint with a 180˚ extension stop. Note: Nylatron washers are only required on models with aluminum uprights. MODEL 2025 WITH ROUND EDGE ALUMINUM UPRIGHTS Joint Upright Order No. Size Dimensions 2025-A4L A 1/4" x 3/4" 2025-A4R A 1/4" x 3/4" 2025-A4P A 1/4" x 3/4" 2025-B4L B 1/4" x 5/8" 2025-B4R B 1/4" x 5/8" 2025-B4P B 1/4" x 5/8" 2025-C6L C 3/16" x 1/2" 2025-C6R C 3/16" x 1/2" 2025-C6P C 3/16" x 1/2" 2025-C8L C 1/8" x 1/2" 2025-C8R C 1/8" x 1/2" 2025-C8P C 1/8" x 1/2" Side Left Right Pair Left Right Pair Left Right Pair...