KNEE JOINTS
48Pages

{{requestButtons}}

Catalog excerpts

KNEE JOINTS - 1

RECKER ORTHOPEDIC * * A Tradition of Excellence A Commitment to Innovation KNEE JOINTS KNEE JOINT ACCESSORIES AND COST SAVING KITS

Open the catalog to page 1
KNEE JOINTS - 2

BECKER KNEE JOINT SYSTEM The following pages illustrate the entire line of Becker knee joint systems. Each is available in a variety of joint sizes, upright materials and upright thicknesses. This represents the largest selection of knee joints on the market today, enabling the orthotist to select a knee joint that perfectly matches the design, strength, and weight considerations of the completed orthosis. Many of our knee joints are available in four sizes: A (Adult), B (Youth), C (Child) and I (Infant). In our system, as the sizes get smaller, the dimensions of the stainless steel...

Open the catalog to page 2
KNEE JOINTS - 3

BECKER KNEE JOINT SYSTEM Below you will find all size specifications for Becker knee joints. Please refer to the chart below or call one of our customer service representatives with any questions you may have. This page is provided as a tool for orthotists to use in choosing the most appropriate knee joint for their patient’s orthosis. MATERIAL SPECIFICATIONS UPRIGHT CONVERSIONS Product 1000 Series Knee Joint Midsections 2000 Series Knee Joint Midsections 9001 Midsection 9002 Midsection 9003 Joint Body 9004 Knee Joint Midsections Aluminum Uprights Stainless Steel Uprights Titanium Uprights...

Open the catalog to page 3
KNEE JOINTS - 4

BECKER KNEE JOINT SYSTEM CONTINUED Designed For: Bar Width Bar Thickness Bushing Hole Diameter Upright Attachment Holes Upright Attachment Rivet **Discretion in choosing a joint size and designing an appropriate orthosis should be used by the orthotist in all cases. MODEL 9002 Designed For: Bar Width Bar Thickness Bushing Hole Diameter Upright Attachment Holes Upright Attachment Rivet **Discretion in choosing a joint size and designing an appropriate orthosis should be used by the orthotist in all cases Model No. 9001 9002 9003* 9004** Midsection Length A Size 5-3/8" 3-7/8" 9" 4-1/4"...

Open the catalog to page 4
KNEE JOINTS - 5

RECKER ORTHOPEDIC M-J A Tradition of Excellence A Commitment to Innovation KNEE JOINTS KNEE JOINT ACCESSORIES AND COST SAVING KITS

Open the catalog to page 5
KNEE JOINTS - 6

BECKER KNEE JOINT SYSTEM HOW TO ORDER First, choose the model number of the knee joint you wish to purchase. Second, decide if you want round edge aluminum uprights, square edge aluminum uprights or round edge stainless steel uprights (a separate box of order numbers will be underneath each type of upright). Third, choose the joint size: “A” (Adult), “B” (Youth), “C” (Child) or “I” (Infant). Last, choose the upright dimension and use the order number to the left of that size. EXPLANATION OF NUMBERING SYSTEM It is not necessary to understand our numbering system to order our products....

Open the catalog to page 6
KNEE JOINTS - 7

MODEL 1001 RING LOCK KNEE JOINT The extended locking surface of this knee joint makes it the strongest ring lock we manufacture. 4 To order parts, please specify the order number, right or left, medial or lateral, followed by the part number desired. MODEL 1001 WITH ROUND EDGE ALUMINUM UPRIGHTS Upright Dimensions 1/4" x 3/4" 3/16" x 3/4" 1/4" x 5/8" 3/16" x 5/8" 3/16" x 1/2" 1/8" x 1/2" MODEL 1001 WITH SQUARE EDGE ALUMINUM UPRIGHTS Order No. 1001-A4T 1001-A6T 1001-B4T 1001-B6T 1001-C6T 1001-C8T MODEL 1001 WITH ROUND EDGE STAINLESS STEEL UPRIGHTS Order No. 1001-A2S 1001-A6S 1001-B2S 1001-B6S...

Open the catalog to page 7
KNEE JOINTS - 8

MODEL 1002 MODIFIED RING LOCK KNEE JOINT Becker Orthopedic introduced the Modified Ring Lock knee joint in 1964 to eliminate the sharp protrusion of standard ring locks in the flexed position. The joints illustrated on this page are fully compatible with the contoured joints shown on the following page. NO PROTRUSIONS To order parts, please specify the order in the flexed position. number, right or left, medial or lateral, followed by the part number desired. MODEL 1002 WITH ROUND EDGE ALUMINUM UPRIGHTS Order No. 1002-A4 1002-A6 1002-B4 1002-B6 1002-C6 1002-C8 MODEL 1002 WITH SQUARE EDGE...

Open the catalog to page 8
KNEE JOINTS - 9

MODEL 1002 WITH CONTOURED LOWER JOINT UNITS The Modified Ring Lock knee joint may be purchased with pre-contoured lower joint units for improved cosmesis. Contoured joints are fully compatible with the straight joints illustrated on the preceding page. The following anterior view photos illustrate the combinations possible. Right Medial Contoured. Right Lateral Straight. Code Letter “R”. Left Medial Contoured. Left Lateral Straight. Code Letter “L”. CONTOURED MODEL 1002 WITH ROUND EDGE ALUMINUM UPRIGHTS Joint Size A A A A A A B B B B B B Contoured Side Right Medial Left Medial Both Right...

Open the catalog to page 9
KNEE JOINTS - 10

MODEL 1003 AUTOMATIC SPRING LEVER KNEE JOINT Model 1003 has a spring loaded lever system which automatically engages the lock when the joint reaches full extension. The joints illustrated on this page are fully compatible with the contoured joints shown on the following page. NOTE: Please follow lever fitting instructions in our Technical Catalog. 5D Pins 5C 5A To order parts, please specify the order number, right or left, medial or lateral, followed by the part number desired. MODEL 1003 WITH ROUND EDGE ALUMINUM UPRIGHTS Order No. 1003-A4 1003-A6 1003-B4 1003-B6 • Shipped fully assembled...

Open the catalog to page 10
KNEE JOINTS - 11

MODEL 1003 WITH CONTOURED LOWER JOINT UNITS The Automatic Spring Lever knee joint may be purchased with pre-contoured lower joint units for improved cosmesis. Contoured joints are fully compatible with the straight joints illustrated on the preceding page. The following anterior view photos illustrate the combinations possible. Left Medial Contoured. Left Lateral Straight. Code Letter “L”. Contoured Side Right Medial Left Medial Both Right Medial Left Medial Both Right Medial Left Medial Both Right Medial Left Medial Both CONTOURED MODEL 1003 WITH ROUND EDGE TITANIUM UPRIGHTS Order No....

Open the catalog to page 11
KNEE JOINTS - 12

MODEL 1004 POSTERIOR OFFSET LEVER LOCK KNEE JOINT Becker Orthopedic introduced model 1004 in 1964. The design objective was to create a knee joint with the axis of motion located posteriorly to the upright bars. NOTE: Please follow lever fitting instructions in our Technical Catalog. To order parts, please specify the order number, right or left, medial or lateral, followed by the part number desired. MODEL 1004 WITH ROUND EDGE ALUMINUM UPRIGHTS Joint Upright Order No. Size Dimensions 1004-A4 A 1/4" x 3/4" 1004-A6 A 3/16" x 3/4" 1004-B4 B 1/4" x 5/8" 1004-B6 B 3/16" x 5/8" • Shipped fully...

Open the catalog to page 12

All Becker Orthopedic catalogs and technical brochures

  1. Stride Family

    20 Pages