- Catalogs
- Beckman Coulter
- UniCel DxH Coulter Cellular Analysis Systems
UniCel DxH Coulter Cellular Analysis Systems
UniCel DxH Coulter Cellular Analysis Systems
The document provides an overview of the UniCel DxH Coulter Cellular Analysis Systems, including models like DxH 600, DxH 800, DxH 900, and their associated Slidemaker Stainer systems. These systems are designed to interface with laboratory information systems (LIS) using serial or TCP/IP connections, adhering to the ASTM interface standard.
The ASTM Low Level Transfer Protocol is detailed, covering the Physical Layer and Data Link Layer, along with Message Content specifications for nine records used in data exchange between instruments and laboratory computers.
Procedures for data exchange include communication establishment, transfer, and termination phases, as well as handling defective frames and timeouts to ensure data integrity.
Safety notices emphasize adherence to operational guidelines to prevent injury and ensure data integrity, highlighting potential hazards like open panels or unauthorized software use.
The document includes a revision history, noting updates to software versions and modifications to standards/protocols and record field contents.
Additional tables provide non-numeric result codes, result flags, and identifiers for panels, tests, and controls. Sample messages and router configuration guidelines are also included.
The DxH systems are available in various configurations, such as stand-alone or combined systems, with specific configurations for models like DxH 600, DxH 800, and DxH 900.
Details on communication protocols include ASTM Low Level Transfer Protocol, Serial Data Exchange using EIA-232-D protocol, and TCP/IP Data Exchange following IEEE 802.3 standards.
The data link layer manages connection and communication, ensuring error detection and recovery through a character-oriented protocol, operating in establishment, transfer, and termination phases.
Mechanisms for handling defective frames and timeouts are included to maintain communication integrity, requiring acknowledgments for each frame.
Technical specifications cover physical connections, including pin assignments for DB-9 connectors and requirements for TCP/IP connections, emphasizing the use of appropriate cables to minimize interference.
Character restrictions simplify recognition of replies and frame delimiters, while the transport layer sequence includes establishment, transfer, and termination phases.
The message layer conforms to CLSI LIS2-A standards, using UTF-8 encoding, with specifications for field and record lengths and delimiters for message parsing.
Details on patient and order records include field names, usage notes, and examples, with specifications for identifiers, sequence numbers, and demographic information.
Recommendations include including date and time in messages for debugging, ensuring all records end with a carriage return, and specifying reflex testing and rerun conditions.
Field delimiters and usage notes are provided, with error codes and recommended actions, and restricted characters outlined in an appendix.
Specifications include field identifiers, data formats, and character restrictions, with procedures for order and quality control records.
Recommendations cover primary ID configuration, action codes, priority codes, and best practices for data integrity and time synchronization.
ASTM standards are followed for record field contents, with recommendations for research use parameters, LOINC codes, and data measurement values.
Examples of result and comment records illustrate data format and content, emphasizing the use of LOINC codes and sequence numbers for tracking.
Comment records are linked to patient, order, or result records, with specific codes for comment sources and types, while host query records manage active requests.
Histograms and dataplots are transmitted as ASCII bytes, with specifications for data and rendering information, including color palettes and dither patterns.
Specifications for dataplots include bitmap dimensions and data options, with non-numeric result codes and flags for various conditions.
Detailed tables list panel identifiers, tests, and histogram identifiers, with information on control panels and test identifiers.
Examples demonstrate the process for uploading patient and control results, including system events and test results with reference ranges and flags.
Examples show how to query records and expected responses, including patient and order information.
An example of an error response is provided for unsupported test panels.
Appendices include supported characters, TCP/IP router connection and configuration instructions, a glossary of key terms, and references to related documents.
Catalog excerpts
Host Transmission Manual UniCel DxH Coulter Cellular Analysis Systems Published Versions: DxH Connectivity - v3 DxH 600 - v1 DxH 900, DxH 690T, and DxH Slidemaker Stainer II - v1 PN B26711AG June 2019 Beckman Coulter, Inc. 250 S. Kraemer Blvd. Brea, CA 92821 U.S.A.
Open the catalog to page 1
UniCel DxH Coulter Cellular Analysis Systems Host Transmission Manual PN B26711AG (June 2019) UniCel DxH Coulter Cellular Analysis Systems includes the following instruments as individual or workcell (connected) systems: • UniCel DxH 800 Coulter Cellular Analysis System • UniCel DxH Slidemaker Stainer Coulter Cellular Analysis System and the following instrument as an individual system: • UniCel DxH 600 Coulter Cellular Analysis System DxH 900 includes the following instruments as individual or workcell (connected systems): • DxH 900 • DxH Slidemaker Stainer II and the following instrument as...
Open the catalog to page 2
Revision History This document applies to the latest software listed and higher versions. When a subsequent software version affects the information in this document, a new issue will be released to the Beckman Coulter Web site. For labeling updates, go to www.beckmancoulter.com/techdocs and download the latest version of the manual or system help for your instrument. Initial Issue AA, 08/2013 Software Version 3.0 Issue AB, 09/2014 DxH Connectivity Software Version 3.0.1.0 DxH 600 Software Version 1.1.0.0 The following sections were modified: • • • • • • • • • • • Purpose in the Introduction...
Open the catalog to page 3
Revision History Issue AD, 09/2015 DxH Connectivity Software Version 3.1 DxH 600 Software Version 1.2 The following sections were modified: • Software version information removed from the copyright page (following the cover page). It is on this Revision History page. • Standards/Protocols in the Introduction • TCP/IP Data Exchange in CHAPTER 1, ASTM: Low Level Transfer Protocol • Added APPENDIX D, Standard Computer NETGEAR ProSafe Router Installation Issue AE, 09/2016 DxH Connectivity Software Version 3.2 DxH 600 Software Version 1.3 The following sections were modified: • Trademark statement...
Open the catalog to page 4
Revision History Issue AG, 6/2019 DxH Connectivity Software Version 3.2 DxH 600 Software Version 1.3 DxH 900, DxH 690T, and DxH Slidemaker Stainer II Software Version 1.2.0 The following sections were modified: • • • • • • DxH 690T was added throughout the manual UniCel DxH Series with System Manager Software Host Transmission Manual copyright page DxH 900/DxH 690T and DxH Slidemaker Stainer II in the Introduction Order (Patient) Record in CHAPTER 3, ASTM: Record Field Contents Result Non-Numeric Codes and Result Flags in APPENDIX A, Additional Tables Related Documents Note: Changes that are...
Open the catalog to page 5
Revision History
Open the catalog to page 6
Safety Notice Read all product manuals and consult with Beckman Coulter-trained personnel before attempting to operate instrument. Do not attempt to perform any procedure before carefully reading all instructions. Always follow product labeling and manufacturer’s recommendations. If in doubt as to how to proceed in any situation, contact your Beckman Coulter representative. Beckman Coulter, Inc. urges its customers to comply with all national health and safety standards such as the use of barrier protection. This may include, but is not limited to, protective eyewear, gloves, and suitable laboratory...
Open the catalog to page 7
Safety Notice Alerts for Warning and Caution WARNING Risk of operator injury if: • All doors, covers, and panels are not closed and secured in place prior to and during instrument operation. • The integrity of safety interlocks and sensors is compromised. • Instrument alarms and error messages are not acknowledged and acted upon. • You contact moving parts. • You mishandle broken parts. • Doors, covers, and panels are not opened, closed, removed, and/or replaced with care. • Improper tools are used for troubleshooting. To avoid injury: • Keep doors, covers, and panels closed and secured in place...
Open the catalog to page 8
Revision History, iii Safety Notice, vii Alerts for Warning and Caution, vii Introduction, xv Purpose, xv Standards/Protocols, xv DxH 800/DxH 600 and DxH Slidemaker Stainer, xv DxH 900/DxH 690T and DxH Slidemaker Stainer II, xvi ASTM: Low Level Transfer Protocol, 1-1 ASTM Physical Layer, 1-1 Serial Data Exchange, 1-1 TCP/IP Data Exchange, 1-2 Data Link Layer, 1-3 Establishment Phase, 1-3 Transfer Phase, 1-4 Frame Number, 1-4 Checksum, 1-4 Acknowledgments, 1-5 Receiver Interrupts, 1-5 Termination Phase, 1-5 Defective Frames, 1-5 Timeouts, 1-6 During Establishment Phase, 1-6 During the Transfer...
Open the catalog to page 9
Patient Record, 3-5 ASTM Field Names that Differ from the UI Field Names, 3-7 Order (Patient) Record, 3-10 ASTM Field Names that Differ from the UI Field Names, 3-13 Order (Quality Control) Record, 3-18 ASTM Field Names that Differ from the UI Field Names, 3-19 Result Record, 3-22 Manufacturer Information Record, 3-24 Comment Record, 3-26 Host Query Record, 3-29 Message Terminator Record, 3-30 Graphic Results, 4-1 Histograms, 4-1 Dataplots, 4-1 Dataplot Data Header, 4-2 Dataplot Data Block, 4-2 Dataplot Data Block Header, 4-3 Rendering Information Block, 4-3 Dataplot Header, 4-5 Dataplot Data,...
Open the catalog to page 10
Query Record Termination Response Example, B-4 Error Response Example, B-4 Additional Tables, C-1 Characters That Can Be Supported, C-1 Restricted Characters, C-1 TCP/IP Router Connection and Configuration, D-1 Standard Computer NETGEAR ProSafe Router Installation, D-1 Power Computer NETGEAR ProSafe Router Installation, D-2 NETGEAR ProSafe FVS318G Router WAN Port Configuration, D-2 Glossary Related Documents
Open the catalog to page 11
Dataplot Data Header, 4-2 Dataplot Data Block, 4-2 Dataplot Data Block Header, 4-3 Rendering Information Block, 4-3 Rendering Information Block Header, 4-4 Host Cable Connector Diagram, 1-2
Open the catalog to page 12
Non-Numeric Result Codes, A-1 Predefined Panel Identifiers and Histograms/Dataplot Types Per Panel, A-2 Test Identifiers per Simple Panel/Simple Panel Subset, A-4 Control Source Identifiers, Control Type Identifiers, Level Identifiers, and Corresponding Tests, A-7 Control Panels and Corresponding Tests Per Control Panel, A-8 Dataplot Identifiers Per Dataplot Type, A-10 Tests and Corresponding Histogram Identifiers, A-10 Diff Cell Population Data Test Identifiers, A-11 NRBC Cell Population Data Test Identifiers, A-11 Retic Cell Population Data Test Identifiers, A-11 Specimen Exception Status Values,...
Open the catalog to page 13All Beckman Coulter catalogs and technical brochures
DxH 500 Series Hematology Analyzers142 Pages
DxH 560256 Pages
- Detection kit
- Infectious disease detection kit
- Clinical detection kit
- Sample preparation system
- Automatic sample processor
- BECKMAN COULTER biochemistry analyzer
- Collection tube
- Laboratory software
- BECKMAN COULTER automatic biochemistry analyzer
- BECKMAN COULTER benchtop biochemistry analyzer
- Cylindrical collection tube
- BECKMAN COULTER hematology analyzer
- BECKMAN COULTER automatic hematology analyzer
- Hospital software
- Immunoassay analyzer
- Benchtop hematology analyzer
- Laboratory assay kit
- Clinical diagnostic immunoassay analyzer
- Automated immunoassay analyzer
- Benchtop immunoassay analyzer