Marine and industrial plant engineering

Compressed gas control module - ECO ECO/7 EVO pressure reducer panel Medium/high flow rate control panel for medicinal gases, available both with automatic exchange and manual reset and fully automatic; both versions are available with pressure transducer or with pressure switch; consisting of two doublehead reduction lines, it guarantees continuous supply with high pressure stability; the outlet connector is for a Ø 22 mm welded pipe; its maximum flow rate with nitrogen at 9 bar outlet pressure is 90 Nm³/h, 1500 Nl/min; the panel is completed by a steel plate and a white PETG cover that is light...

III source panel for medicinal gases, available with pressure transducer or with pressure switch; consisting of a doublehead reduction line, it guarantees continuous supply with high pressure stability; the outlet fitting is for a Ø 22 mm welded pipe; its maximum flow rate with nitrogen at 8 bar outlet pressure is 70 Nm³/h, 1166 Nl/min; the panel is completed by a powder coated steel plate and a white PETG cover that is light and practical to install. MAINTENANCE EQ REDUCTION BLOCK ECO EVO H.F. MAINTENANCE EQ ECO EVO REDUCER BLOCK Technical data CODE ALARM SIGNAL INLET CONNECTION OUTLET CONNECTION...

Technical data CODE COMBURENTS - INERT COMBURENTS- INERT - Flexible connection Flex stainless steel Flexible High Pressure connection consisting of a parallel spiral metal hose made of AISI 316 stainless steel with a double AISI 304 stainless steel reinforcement braid and an anti-kink cable, used to connect tanks to manifolds. Technical data CODE INLET CONNECTION OUTLET CONNECTION BENDING RADIUS Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]

Technical data CODE INLET CONNECTION OUTLET CONNECTION BENDING RADIUS Manifold copper connection Copper connection fitting for connecting two high pressure ramps or at the inlet of the decompression panel. Technical data CODE Comburents - Inerts Copper coil Flexible connection made of Ø 8 mm chemically nickel-plated copper pipe, used to make a High Pressure connection between the tank and the manifold or control module. Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]

Technical data CODE INLET CONNECTION INLET - OUTLET CONNECTION - Cylinder rack Rack The cylinder rack is used to wall mount one or more 40/50 l compressed gas cylinders. Technical data CODE Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]

- Accessories Bleed valve The bleed valve is installed at the end of a manifold to purge the residual pressure in the line between the cylinders and the manifold itself and for maintenance or replacement of supply lines. Technical data CODE INLET CONNECTION DRAIN CONNECTION Gas alarm manifold The SINTESY S120 alarm module is used to control alarms in food-grade gas distribution systems. Technical data CODE POWER SUPPLY Contact type pressure gauge Pressure gauge with electric contact class 2,5; when the pressure drops below the 15 bar threshold, the device sends a signal to the alarm to which...

Technical data CODE CABLE LENGTH Line pressure regulators - 451 451 line pressure regulator Line pressure regulator with two pressure gauges used to reduce the pressure to that of the line or equipment; max inlet pressure 30 bar (200 bar CRL003), max outlet pressure can be regulated to 10 bar (12 bar CRL003). MAINTENANCE EQ 451 PRESSURE REDUCER H.P. MAINTENANCE EQ 451 PRESSURE REDUCER L.P. Technical data CODE INLET CONNECTION OUTLET CONNECTION OXYGEN, NITROGEN, ARGON, HELIUM, CARBON DIOXIDE, HYDROGEN OXYGEN, NITROGEN, ARGON, HELIUM, CARBON DIOXIDE, HYDROGEN Behringer S.r.l. via Gualco 4, 16165...

Workstations - Single EURO/7 pressure regulator workstation Worktation with one supply point used to reduce oxygen, fuel gas and inert gas line pressure; with a EURO pressure regulator (or manoflowmeter or flowmeter). MAINTENANCE SEAT EQ WORKPLACES MEMBRANE MAINTENANCE EQ WORKPLACES Technical data CODE INLET CONNECTION OUTLET CONNECTION PRESSURE GAUGE RANGE With safety valve With safety valve PROPANE METHANE With safety valve With safety valve Without safety valve ARGON CARBON DIOXIDE 0-30 l/min for CO2 Manoflowmeter - 0-32 l/min for Ar ARGON CARBON DIOXIDE Behringer S.r.l. via Gualco 4, 16165 Genova...

- Modular EURO/7 modular pressure regulator workstation Multi-supply-point station, complete with EURO pressure regulator, pressure gauge and three or six 0-30 l/min flowmeters. MAINTENANCE SEAT EQ WORKPLACES MEMBRANE MAINTENANCE EQ WORKPLACES Technical data CODE INLET CONNECTION OUTLET CONNECTION PRESSURE GAUGE RANGE ARGON ANIDRIDE CARBONICA ARGON ANIDRIDE CARBONICA Safety valves - Nesplon 7 Nesplon 7 Nesplon 7 valves are designed to keep the end utilities of industrial gas lines safe; they’re fitted with flame arrestors and gas check valves. Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T...

Technical data CODE INLET CONNECTION OUTLET CONNECTION - Nesplon/24 Nesplon 24 Nesplon 24 valves are designed to keep industrial gas lines or multi utility panel boards safe; they’re fitted with flame arrestors and gas check valves. MAINTENANCE EQ NESPLON/24 SAFETY VALVE Technical data CODE INLET CONNECTION OUTLET CONNECTION Gas distribution panel connection safety kit The safety kit is necessary if the customer's need is to power n. MAINTENANCE EQ NESPLON/24 SAFETY VALVE Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]

Technical data CODE - Nesplon/400 Nesplon 400 The Nesplon 400 safety valve for high flowrate industrial gas lines performs three functions, flame arrestor, gas check and overpressure discharge in compliance with ISO 5175-1 standards. Technical data CODE Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]

- Excess flow vavles Excess flow valve Excess flow valve used to cut off the gas supply in the case of excess flow, if a pipe ruptures for example. Technical data CODE INLET CONNECTION OUTLET CONNECTION CARBON DIOXIDE CARBON DIOXIDE Quick-fit couplings - EN 561 series EN 561 STM socket Quick-fit coupling for quickly connecting two hoses. Technical data CODE Ø 8 mm metal hose clamp Ø 10 mm metal hose clamp Ø 8 mm metal hose clamp Ø 10 mm metal hose clamp Free flow Ø 10 mm metal hose clamp Behringer S.r.l. via Gualco 4, 16165 Genova ITALY T +39 010 8309103 e-mail [email protected]