Anaerobic Workstation · This workstation integrates CO , Constant temperature and humidity, 2 anaerobic incubator whole. · Can operate as an anaerobic or micro-oxygen chamber (oxygen concentration: 0-10%). · Fully automatic humidity control system to avoid drying of the Petri dishes. · Sample transfer: can transfer 40 pcs of 90mm plates at a time, single dish transfer device is optional. · Available with automatic sleeve gassing system operated by foot-switch, so you can control vacuum and Nitrogen gas filling efficiently. Equipped with standard external vacuum pump. · Using high-efficiency palladium catalyst to keep the oxygen concentration less than 0.1% without frequent activation. · UV lamp for sterilization. · Full-automatic control for gas replacement path, with positive pressure and negative pressure protection. · Can perform CO , humidity and temperature control. · Unique oil bottle type pressure relief design, protects internal positive pressure and prevents air leakage. · With a number of low pressure, over temperature protection devices. · The whole front cover can be lifted off for placing large instruments or thorough cleaning. · Equipped with standard power socket. · Touch screen directly displays the oxygen percentage of the operating room, easy for observation. · Latex gloves for comfortable and flexible operation. · Bare-hand operating system is optional. Ensure comfortable operation with no skin allergies. 2 Specifications Model Time for creating anaerobic state in sample chamber Time for creating anaerobic state in operation chamber Anaerobic environment maintenance time Temperature Range Temperature Stability Temperature Uniformity CO2 Range CO2 Control Accuracy Humidity Control Range Humidity Fluctuation Power Rating Power Supply Interior Chamber Size (W×D×H)cm Operation Chamber Size (W×D×H)cm Sampling chamber size (W×D×H)cm Shell material