1. Catalogs
  2. Beijing Kingst Commercial & Trade
  3. Kingst filter T4F and T4M specification

Kingst filter T4F and T4M specification

Kingst filter T4F and T4M specification

Kingst filter T4F and T4M specification

Product catalog summary
Specification of the Filter T4F, T4M
1. Intended Usage
The T4F and T4M filters are designed for use with a sampling line and an airway adapter-T type, as well as a nasal tube or nasal oxygen tube. They connect between the airway and gas monitor of respiratory, anesthesia, and emergency equipment to sample gas microflow for measurement. These filters should be operated by qualified professionals in monitoring and anesthesia.
2. Measurement Principle
The T4F utilizes Kingst's patented water vapor filter technology to remove water vapor, secretions, bacteria, and other impurities from exhaled gas samples. The filter is designed with a Luer-lock compatible top for easy sampling tube replacement and features a hydrophilic wick with a 1ml water storage capacity. The large filter membrane at the bottom prevents water buildup and clogging, ensuring a rapid response time and precise CO2 waveform.
3. Technical Specification of Water Filter
  • Models: T4F (664522), T4M (664523)
  • Color: White
  • Weight: 4g
  • Fluid Container: 1ml
  • Sample Flow: 50-250cc/min
  • Anti-bacterial Filter: 0.2um pore size
  • Inlet Port: Meets 6% of Luer cone connector of Standard (ISO 80369-7)
  • Material: Main body: ABS, Filter membrane: PTFE
  • Material Characteristics: Non-toxic, non-absorbent, non-diffusive to respiratory and anesthetic gases
  • Working Temperature: 5°C to 55°C
  • Storage Temperature: -20°C to 70°C
  • Temperature Resistance: -40°C to 100°C
  • Chemical Resistance: Resistant to weak acid, neutral oil; intolerant to UV light, strong alkali, strong acid, chloric acid, and amine ketone
  • Pressure Resistance: -200mmHg to +200mmHg
  • Cleaning and Disinfecting: Single use; clean and sterilize the main body with 70% alcohol or aldehydes
  • Service Interval: Replace every two months or when sticky substances enter
  • Continuous Operating Time: 14.5 hours @99%RH, non-condensing; 80 hours @75%RH, non-condensing
  • Recovering Time: Drying for 24 hours under good ventilation
  • Packaging: Each filter is separately packed, not sterilized
See more

Catalog excerpts

Kingst filter T4F and T4M specification-1

Specification of the filter T4F, T4M 1. Intended usage This product (T4F/T4M) is designed for use with a sampling line and an airway adapter-T type, as well as a nasal tube or nasal oxygen tube. It is designed to be connected between the airway and gas monitor of respiratory, anesthesia and emergency equipment, and to sample the gas microflow inside the airway to the gas analysis chamber inside the monitor for measurement. This product should be operated by a qualified professional in the field of monitoring and anaesthesia. The T4F and T4M water filter are used for sidestream module and it can be installed on it's receptacle(Fi-Lock). The Luer-lock female socket of T4F can connect sampling line or nasal cannula with Luer-lock male plug, and the Luer-lock male socket of T4M can connect sampling line or nasal cannula with Luer-lock female plug.

 Open the catalog to page 1
Kingst filter T4F and T4M specification-2

2. Measurement Principle T4F with Kingst patented water vapor filter technology The Kingst water vapor filter removes water vapor, secretions, bacteria and other impurities from exhaled gas samples, including the liner, jacket and connecting structure, the patented filter can be combined with a disposable collection tube or nasal tube/nasal oxygen tube to significantly improve the efficiency of moisture treatment in gas analysis, via an efficient water removal function. The filter's top is Luer-lock compatible for easy sampling tube replacement; the main body is ABS, equipped with a hydrophilic...

 Open the catalog to page 2
Kingst filter T4F and T4M specification-3

3. Technical specification of water filter Water Filter Fluid Container Sample flow Anti-bacterial filter Inlet port Meets 6% of Luer cone connector of Standard (ISO 80369-7) Filter main body: ABS Filter membrane: PTFE Material character Working temperature Non-toxicity, non-absorption and non-diffusion to respiratory gases and anesthetic gases 5°C to 55 °C Storage temperature -20°C to 70 °C Temperature resistance Chemical resistance features Pressure resistance Cleaning disinfecting -40°C to 100°C Resistant to weak acid, neutral oil, intolerant to ultraviolet light, strong alkali, strong acid,...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.