980nm laser vascular removal
1 / 5Pages

Catalog excerpts

980nm laser vascular removal - 1

980nm Diode Laser Treating Protocol (Power:40W) Thank you for purchasing beauty equipment from our company, please read this manual carefully before use!

Open the catalog to page 1
980nm laser vascular removal - 2

Function 1: Remove red blood streaks Treatment feeling: There is a slight tingling sensation when removing red blood streaks, and most people can tolerate it. Anesthetics are not recommended. For people who are particularly afraid of pain, or particularly sensitive areas around the nose groove, anesthetics can be used. Common parameters: The power generally starts from 6 watts, the face generally uses 6W-12w, and the limbs generally use 7W-13W. Use 30ms-40ms for pulse width, not more than 60ms. Use 2 or 3HZ for frequency. The focusing ring can be adjusted according to the thickness of the...

Open the catalog to page 2
980nm laser vascular removal - 3

Function 2: Eliminate nail fungus (onychomycosis): Treatment feeling: The intraoperative treatment is very comfortable and the nails feel warm. Common parameters: Recommended value of treatment parameters: Use 0.2MM focusing ring, under normal circumstances the power is usually 12w and above. The commonly used range of pulse width is 20ms~40ms. The usual frequency range is 5Hz. Treatment course and interval Vertically irradiate the sick nails to heat up for about 10 seconds, and the energy gradually increases. Each nail will be hit with 1500 shots at a time. Finish 10 nails one by one, only...

Open the catalog to page 3
980nm laser vascular removal - 4

shots per part, whichever is not hot. According to the specific conditions of the pain, the irradiation can be performed every other day. Pen requirements: Operate the hand tool perpendicular to the skin and about 1cm away from the skin. Pay close attention to the skin color changes of the treated area. If the skin becomes excessively red, reduce the output power in time. Function 4: Rejuvenation and anti-inflammatory Treatment feeling: The treatment process is very comfortable and slightly warm. Common parameters: No focusing ring is used. The recommended energy starts from 12W, generally...

Open the catalog to page 4
980nm laser vascular removal - 5

dealing with serious skin lesions, you can use a prepared 0.9% normal saline cotton ball to clean the secretions of the damaged epidermis and use it. Dry the epidermis with a dry cotton ball and disinfect it with 0.5% vital iodine, then laser irradiation can be carried out. Common parameters: No focusing ring is used. The power is usually 15w and above, The common range of pulse width is between 80ms~90ms, Common frequency range is 6~7Hz, Treatment course and interval It is better if the skin feels slightly warm after about 5 seconds of irradiation. The irradiation time and length of...

Open the catalog to page 5

All Beijing Medris Laser Technology catalogs and technical brochures

  1. nd yag laser

    8 Pages