Height adjustable table
12Pages

SAFE & SMART HEALTHCARE SOLUTIONS OPERATING MANUAL HIGH/LOW TABLEversion 1.3 C€

6. Safety instructions for table with superstructure 8 REVISION HISTORY VERSION DATE CODE COMMENT This edition replaces all previous editions. The specifications in this document can be updated without prior notice. The reproduction or publication of the content of this document is not permitted without specific permission by Belintra.

1. INTRODUCTION We are pleased you have chosen a Belintra product. This manual will tell you how to use and maintain our high-low packing tables. This electrical (230 V – 50 Hz AC) height-adjustable table is used in the medical sector, particularly for wrapping sterile instrument baskets, for example in central sterilisation departments. The table allows the user to work in an ergonomically justified manner because the height can be adjusted to suit the type of task, the physiognomy of the user and even personal preference. Thanks to the flexibility which these tables offer, the best...

3. SAFETY INSTRUCTIONS ❱❱ It is dangerous to alter the specifications or modify this product in any way. ❱❱ The manufacturer accepts no responsibility for damage incurred through use other than specified in this manual. ❱❱ Never climb on the table. ❱❱ All installation and maintenance work must be carried out by authorised and qualified staff. ❱❱ Use the table only in technically perfect condition in accordance with the described purpose for which the table was made, in accordance with the operating manual. ❱❱ Use the table only in technically perfect condition in accordance with the...

❱❱ The table should only be connected to a TT or TNS network. Also, the table may only be connected to an earthed socket that is protected by a residual current device. ❱❱ The following guidelines should be observed: VDE0100, EN 50110, EN 60204, EN 50178, EN 60335, fire safety guidelines, as well as the guidelines for the prevention of accidents. ❱❱ Make sure that the voltage in the control box is correct before connecting to the mains (230V – 50 Hz). ❱❱ The control box may not be wrapped in insulating material. The heat produced by this unit must be able to escape. As there are no vent...

4. GENERAL PRODUCT SPECIFICATIONS Electrical (230 V – 50Hz AC), height-adjustable packing table. The entire table has a maximum total power of 3500 W. The frame, the worktop and superstructure (optional) are earthed. The table is equipped with two sturdy lifting columns in anodised aluminium. The height is adjustable between 720 and 1220 mm. Load per column is 150 kg. The lifting column is blocked in the event of overload. Changes to the configuration, installation or use of our products can affect the operation and durability of the product. Adjustments should only be made with the express...

components (actuator and control) must be connected before you plug the control box into the mains. If the control box produces unusual noises or smells, immediately turn off the power. The control box may not be wrapped in insulating material. The heat produced by this unit must be able to escape. As there are no vent holes, the heat is transferred along the surface of the housing. The controls for adjusting the height are provided with three memory positions, enabling you to set multiple positions. This is very useful when several people use the same workstation. The height is adjustable...

completely retracted (to the lowest point). Then you release the button and press the ‘down’ button again for 15 seconds. The columns will briefly move a few millimetres up and down. You can now use the set again. 6. INSTRUCTIONS FOR TABLE WITH SUPERSTRUCTURE The high/low table of Belintra comes in different versions. If desired, the table can be equipped with a superstructure with the following options: »» compressed air connection »» UTP connection »» PC arm »» pedestal »» lighting with switches and optional connections: - sockets - UTP connection - compressed air connection magnifying...

❱❱ Sockets: The load of the safety sockets on the table may be 2500 W maximum in total - 230 VAC (16A) – 2 pole + pin earth. ❱❱ UTP connector: A female RJ45 connector is equipped with a UTP category 5e of 5 m long with a male RJ45 (with straight connection according to TIA/EIA-518-A) for Gigabit Ethernet. ❱❱ Compressed air connection (2 pieces): Max. 10 bar– Orion shortcut ❱❱ Lighting: lighting with switch and canopy – Fluorescent lighting – T8 – 120 mm – 36 W ❱❱ Monitor arm: The monitor arm features a VESA75 and a VESA100 connection. A mounted monitor can be tilted and rotated with this...

8. INSPECTION AND REPAIRS The table should be checked by technical personnel at least once a year. Important aspects include: checking for wear and check the screws. If you detect irregularities, have these examined by authorised and qualified staff who, if necessary, will only use identical replacement parts. This ensures that the safety of the unit is maintained. ❱❱ The control box should be cleaned regularly to remove any dust and dirt and should be checked regularly for mechanical malfunction or damage. ❱❱ If the control box produces unusual noises or smells, immediately turn off the...

CAUTION! All electronic systems (e.g. control box, controls, lifting column) are sealed units and do not require internal maintenance. They may not be opened. All warranty will expire if this is not fulfilled. When a unit is opened, there is risk of failure. Repairs may only be carried out by Belintra’s own qualified technical personnel. Belintra cannot be held liable for damage caused by improper use or negligent maintenance. 9. CLEANING ❱❱ Switch off the appliance and unplug it from the mains before servicing it. ❱❱ The table is provided with an integrated electrical installation. Remove...

11. ENVIRONMENTAL GUIDELINES Dispose of this product through an approved disposal centre or via your community waste facility. Please observe the current regulations. If in doubt, please contact a specialised firm. Dispose of all packaging material in an environmentally-friendly manner.