Analog Amplifier AM6504
2Pages

Analog Amplifier AM6504 Product Details and Specifications Bertec’s amplifiers are designed for use with our line of force plates and force transducers. Their solid construction will handle the rigors of any application as our products are used internationally in research, clinical, and industrial facilities. The AM6504 amplifier has a digital input and provides an analog output with selectable gains to offer flexibility with a simplified setup. Design Unique Features The AM6504 amplifier uses the digital input to produce an analog output. The gain of the analog output is user selectable, and has four different settings (1,2,5,10). Gain selection switches are provided in the top panel. The digital input is a female 9-pin D-Sub connector; whereas, the analog output is a female 15-pin D-Sub connector (see pin assignment). The six output channels provide an analog signal in the range of ±5V or ±10V. Six analog scale factors are provided with the force plate to convert the analog signals to force and moment units. The auto zero button is utilized to remove tare load offset for each channel output. The main power input is a universal input with the range 100-250V, 50-60Hz. Note: The analog outputs provide calibrated full-scale outputs per rated load range of each channel of the attached transducer. For example: If the transducer has a ±1000N load range in the Fz channel, the -5.00V output on the Fz will correspond to a -1000N load and +5.00V corresponds to +1000N. 2500 Citygate Drive Columbus, Ohio 43219 bertec.com - Crosstalk-free calibrated outputs - 6 channels of +/- 5 V OR +/- 10 V analog output - Mains powers 100–250V, 50–60Hz - 30ppm accurate digital gain ratios and 50ppm accurate analog output autozero

Analog Amplifier AM6504 Technical Specifications Gain Switch Settings THE GAIN SWITCH SETTINGS ARE ON THE TOP Front Panel Back Panel STATUS POWER ZERO ANALOG OUTPUT INDICATORS FOR STATUS (TOP) AND POWER (BOTTOM) ZERO BUTTON TRANSDUCER INPUT 2500 Citygate Drive Columbus, Ohio 43219 bertec.com POWER INPUT CH5 : Pin 7 CH6 : Pin 8 Auto Zero : Pin 9 GRND : Pin 10