Instrumented Treadmills Bertec’s line of Instrumented Treadmills is designed to reduce gait laboratory space requirements and eliminate the limitations inherent in a traditional gait walkway. Unique Features Unique design features result in  superior dynamic characteristics of the treadmill. The dual belt treadmill has two belts which can be controlled independently, each half having its own 6-modular incline feature that can be added to the system for uphill and downhill analysis of movements. The control electronics incorporate medically isolated transformers. >> Independent 6-component load measurement from each belt (Fx, Fy, Fz, Mx, My, Mx). A smaller version of FIT is available for animal studies (Mini-FIT). The Mini-FIT can be configured to have four belts which independently measure forces for quadrupedal animal studies (Quad-FIT). >> One year standard warranty with optional maintenance packages. >> Independent control of individual belts in both directions. >> No signal interference from outside sources with 100% digital encoding. Bertec treadmills are mounted on mounting plates, which are glued to the floor. Such a configuration along with total isolation of each half from the other ensures stable operation of the treadmill. Bertec Corporation Instrumented Treadmill

Standard Treadmill Configuration Fully Instrumented Treadmill (FIT) Mini-FIT for Animal Application Quad-FIT for Quadrupedal Applications Two independent force measuring running belts, approximately 1.75 m (70 in) long and 0.5 m (20 in) wide per belt. Two independent force measuring running belts, approximately 1 m (40 in) long and 0.3 m (12 in) wide per belt. Four independent force measuring running belts, approximately 1 m (40 in) long and 0.3 m (12 in) wide per belt. Left side speed is controlled separately from the right side speed. *0.15 m (6 in) wide version available. *0.15 m (6 in) wide...