Revision systems Catalogue - revision implants

Femoral components Revision SF stem (see page 9) Cemented revision stem (see page 10)

Acetabular components Reconstruction acetabular cage (see page 12) Reconstruction acetabular cage - type BS (see page 13) Oval revision shell – type TC (see pages 14 & 15)

The implant is tackling (through accurate and quick surgical technique) essential problems that may appear when cemented or/and cementless stems have failed and have to be replaced. Its shape concept is securing: ■ implant stability ■ optimal modularity in majority of the revision cases ■ tailored assembly of implant ■ correct neck set-up ■ optimal positioning ■ renewal and retention of limb length ■ superior osteointegration ■ optimal infilling of medullary canal The implant consists of the components as follows (details - see page 8) : ■ Proximal segment - type A - type AX ■ Connecting screw...

The implant is intended for a vaulting of acetabular defects. Features: ■ it exploits the shape of cementless shell (type SF) ■ it allows the stabilization even in a defective acetabulum ■ it allows the fixation out of defective tissue without using an excessive approach ■ it improves the conditions for a follow-up re-implantation ■ it is based on a press-fit fixation principle The implant consists of the components as follows (details - see pages 14 & 15): ■ Acetabular shell - type TC ■ Insert of cementless acetabular shell type SF - standard - with offset 10° ■ Distal hook ■ Screws - cortical -...

Proximal segment - type RMD Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) L Type Order number Connecting screw w/safety peg is delivered as a part of proximal segment. Cementless stem - type RMD Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Order number

■ Cemented revision stem Material: Wrought high nitrogen stainless steel (ISO 5832-9)

Material: Unalloyed titanium (ISO 5832-2)

Material: Stainless steel (ISO 5832-1) ■ Reconstruction acetabular cage - type II/B Material: Stainless steel (ISO 5832-1)

■ Reconstruction acetabular cage - type BSMaterial: Stainless steel (ISO 5832-1) left(L) / right (R) ■ Cortical screw - short headMaterial: Stainless steel (ISO 5832-1) Diameter D L Order ■ Cancellous screw - short headMaterial: Stainless steel (ISO 5832-1) Diameter D L Order

Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) ■ Insert of cementless acetabular shelly - type SF (standard) Material: Crosslinked UHMWPE (ISO 5834-2) Shell diameter - D (as per above) [mm] Order number ■ Insert of cementless acetabular shelly - type SF (with offset 10°) Material: Crosslinked UHMWPE (ISO 5834-2) Shell diameter - D (as per above) [mm] Order number

■ Cortical screw for cementless shell - type TC■ Cancellous screwfor cementless shell - type TCMaterial: Wrought titanium Ti6Al4Valloy (ISO 5832-3)Material: Wrought titanium Ti6Al4Valloy (ISO 5832-3) Diameter L Order ■ Angular stable screw for cementless shell - type TCMaterial: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Diameter L Order

KNEE List of implants The revision option of knee joint replacement derived from the successful primary knee endoprosthesis, type SVL. The implants is namely intended for: ■ revision surgery when components became loosen due to larger bone losses. ■ surgery of knee joints in cases when either a fibrous instability or an extensor deficiency with excision of posterior crucial ligament were found. ■ some injury indications (e.g. periprothetic fractures) The implant consists of the components as follows (details see pages 20 to 31) : ■ Femoral component - type SVR ■ Tibial component - type SVR ■...

The anatomically constrained knee replacement with an inner rotation. Due to its higher stability it can be applied (with an advantage) as a custom-made option in younger patients. The implant is namely intended for: ■ patients with deformation changes and deep instability of knee joint ■ patients either with bone tumors in the knee section or with huge bone defects being of different origin. The implant consists of the components as follows (details see pages 32 to 35) : ■ Femoral component - type CMS ■ Tibial component - type CMS ■ Insert - type CMS ■ Hanging item ■ Rotating item ■ Femoral...

KNEE Revision knee endoprothesis Material: Co-Cr-Mo casting alloy (ISO 5832-4)

KNEE Revision knee endoprothesis

Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) ■ Femoral fitting - type SVR Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Note: Type I is intended just for size 2 of femoral component, while type II is intended for all other sizes of femoral component.

KNEE Revision knee endoprothesis ■ Cementless tibial stem - type SVR Diameter D L Order Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) ■ Shaped tibial augmentation - type SVRMaterial: Wrought titanium Ti6Al4V alloy (ISO 5832-3) 10

KNEE Revision knee endoprothesis Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Left (L) / Thickness Order right (R) [mm] number

Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Size

KNEE Revision knee endoprothesis Distal femoral augmentation for left femoral component - type SVR Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Thickness of distal augmentation [mm] Thickness of dorsal augmentation [mm] Order number

Distal femoral augmentation for right femoral component - type SVR Material: Wrought titanium Ti6Al4V alloy (ISO 5832-3) Thickness of distal augmentation [mm] Thickness of dorsal augmentation [mm] Order number

KNEE Hinge rotation knee endoprothesis Material: Co-Cr-Mo casting alloy (ISO 5832-4)

Order number

KNEE Hinge rotation knee endoprothesis■ Hanging item - type CMSMaterial: Wrought high nitrogen stainless steel (ISO 5832-9) Size Thickness of surface Marks Material: Stainless steel (ISO 5832-1) Size

Insert - type CMS Material: Order number

BEZNOSKA, s.r.o. Delnicka 2727, 272 01 Kladno, Czech Republic www.beznoska.com, [email protected]