BINDER Product overview
40Pages

BINDER Product overview Drying and heating chambers Climate chambers Ultra low temperature freezers EN BINDER product overview

On your doorstep – worldwide THE ULTIMATE in premium quality – produced in Germany BINDER simulation chambers perform complex laboratory tasks with absolute reliability. They are developed and manufactured exclusively at the company site in Tuttlingen, southern Germany. We carry out all production stages in our factory – parts are punched, bent, and welded with precision; units are insulated and then finally assembled with care. By doing this, we can guarantee quality across the board. We supply around 22,000 premium units globally each year, with our intensive quality checks ensuring the...

Product overview | BINDER Looking for the right climate chamber? BINDER products fit the bill perfectly. Every BINDER climate chamber is equipped with top-of-the-range technology made in Germany and makes it possible to precisely simulate biological, chemical, and physical environmental conditions. The wide range of products from the leading specialist addresses the various requirements in science and industry. It comprises temperature and climate chamber models, material testing and drying chambers, as well as environmental simulation chambers. You’ll find the ideal unit for every...

Growth Precise regulation of temperature, humidity, CO2 concentration, and O2 concentration as physical parameters, plus reliable reproducibility of test conditions, are the most important requirements for incubators and climate chambers used in scientific laboratories that work with living organisms. BINDER is aware of these requirements and works continuously to provide you with the perfect CO2 incubators, microbiological incubators, and plant growth chambers. They deliver innovative technical solutions and comprehensive equipment options as standard. Cell biology CO2 incubators CB-S | CB...

CO₂ incubators with hot air sterilization and heat sterilizable CO₂ sensor | CB series Features: • Temperature range: from +4°C above ambient temperature up to +60°C • Humidity range: 90 to 95% RH • CO₂ control range: 0 to 20 vol.% CO₂ • Tried-and-tested anti-contamination concept with 180°C hot air sterilization • Optimized double-pan humidification system with condensation protection • CO₂ gas-mixing jet with Venturi effect • Hot-air sterilizable CO₂ sensor with single-beam infrared technology The CB series is also available with active humidification Seamless, deepdrawn chamber with...

Accessories and configurations | Growth ACCESSORIES AND CONFIGURATIONS High-quality solution for the incubation of suspension cell cultures in CO2 incubators. As only corrosion-resistant components are used in the stainless steel housing, the CO2 shaker is ideal for gassed incubators with increased CO2 concentrations and nearly saturated air humidity. Available as a Universal variant with ribbon cable for all BINDER CO2 incubators with an interior of 150 liters or more and a Professional variant for CB models from 150 liters upwards with a LEMO socket as an electric access port. CB-S, CB...

Growth | Standard incubators Standard incubators with natural convection | BD Avantgarde.Line series Features: • Temperature range: ambient temperature +5°C to +100°C • Excellent temporal and spatial temperature accuracy thanks to APT.line™ preheating chamber technology • Transfer of heat through natural convection • Up to 30% lower energy consumption compared to conventional units on the market • Disinfection possible at +100°C • Easy and intuitive to use thanks to modern control technology Controller and timer functions Ramp function • Class 3.1 independent temperature safety device •...

Standard incubators | Growth Standard incubators with mechanical adjustment | B Classic.Line series Features: • Temperature range: +30°C to +70°C • Hydro-mechanical thermostat • Inner door made of tempered safety glass • 2 chrome-plated racks • Stackable Stainless steel inner chamber Glass pane with door gasket Available sizes: B 28 model Standard incubators with forced convection | BF Avantgarde.Line series Features: • Temperature range: +7°C to +8°C above ambient temperature up to +100°C • Excellent temporal and spatial temperature accuracy thanks to new APT.line™ technology • Transfer of...

Growth | Cooling incubators Cooling incubators with compressor technology | KB series Features: • • • • • Temperature range: -10°C to 100°C Powerful cooling with compressor cooling unit Precise temperature control Disinfection possible at +100°C Up to 30% lower energy consumption compared to the previous model • Adjustable fan speed Controller with timesegment and realtime programming Inner chamber made Inner door made of White light LED of corrosion-resistant tempered safety glass modules providing stainless steel flexible and simple placement (option) All details on the series...

Growth chambers | Growth Growth chambers with light | KBW series Features: • Temperature range: 0°C to +70°C • Homogeneous temperature distribution thanks to APT.line™ preheating chamber technology • Cooling system for operation that is stable in the long term • Illumination cassettes providing flexible placement, which ensure homogeneous illumination over the entire usable area • Intuitive touchscreen controller with time-segment and real-time programming Type of illumination for the illumination cassettes: daylight fluorescent lamps, light color 865 (standard) Illumination cassettes Inner...

Growth | Accessories and configurations ACCESSORIES AND CONFIGURATIONS System for preparation or complete desalination of tap water, complete set BINDER PURE AQUA SERVICE containing safety pressure container, single-use cartridge, measuring device, and all necessary connecting parts. KBWF series Arabidopsis illumination External, consisting of fresh and waste-water containers (20 liters each), cabling and external pump, for hanging from the back of the unit. KBWF series Illumination cassettes equipped with Arabidopsis fluorescent tubes instead of daylight fluorescent tubes. Light color 842....