Product Overview

This document provides detailed sizing and part number information for an 8-chamber standard leg sleeve, classified under HCPCS code E0667 for full leg coverage.

Key Sections

1. Measurement Points and Terminology

• Measurement Locations: Mid Thigh, Mid Knee, Mid Calf, Ankle, Arch (Instep), Crotch to Heel (Length), and Inguinal Crease.
• Size Categories: Small, Medium, Large, with additional width options: Narrow, Standard, Wide, and Extra Wide.

2. Part Numbers and Corresponding Sizes

Each size and width combination has a unique part number, for example:

• GN8-3045-S: Small Narrow
• G8-3045-M: Medium Standard
• GW8-3045-L: Large Wide
• GXW8-3045: Extra Wide

3. Circumference and Length Measurements

Measurements are provided in both inches and centimeters, representing the maximum allowable limb dimensions for each size and width category.

• Inches: Circumferences at mid-thigh, mid-knee, mid-calf, ankle, and arch range from approximately 18" to 44" depending on size and width.
• Lengths: Crotch to heel lengths vary between 25.5" and 36".

4. Measurement Guidelines

Measurements correspond to the maximum limb points to ensure proper fit and compression. The document emphasizes the importance of accurate circumference and length measurements at specified anatomical landmarks.

Critical Information and Recommendations

• Ensure limb measurements do not exceed the maximum values listed for each size and width to guarantee correct garment fit.
• Select part numbers based on combined size and width requirements to accommodate patient anatomy.
• Use the provided measurement points consistently for accurate sizing.

Summary

This technical document serves as a comprehensive sizing guide for ordering and fitting the 8-chamber standard leg sleeve. It details part numbers, size categories, width options, and precise limb measurements in both imperial and metric units to facilitate proper garment selection and patient fit.