S@FE SP Special Cabinets for Robot

Product catalog summary

Overview
The S@FE SP cabinets by BioAir S.p.A. are designed to provide a controlled environment for liquid handling robots, offering containment equivalent to a Class II cabinet as per EN12469:2000 standards. These cabinets are available in two sizes, 2.4m and 2.8m in width, and can be completely disassembled for easy transport and installation.

Main Features

Constructed with stainless steel AISI304 internal surfaces.
Equipped with internal power sockets and lateral cable pass-throughs.
Features HEPA H14 filters with >99.995% efficiency for particles 0.1-0.2 microns.
Microprocessor controlled with an LCD display and softkey membrane controls.
Includes a raised frontal grid for high-efficiency containment and lateral grids for better airflow.
Removable frontal grid for easy robot installation and maintenance.
Two exhaust filters positioned to avoid ceiling interference.

Technical Data

Models: S@FE SP 2.1 and S@FE SP 2.4.
External dimensions: 2339x1420x1790 mm and 2800x1420x1790 mm respectively.
Working area dimensions: 2005x894x978 mm and 2409x894x978 mm respectively.
Height including stand: 2600 mm for both models.
Front aperture: 195 mm for S@FE SP 2.1 and 250 mm for S@FE SP 2.4.
Weight: 700 kg for S@FE SP 2.1 and 750 kg for S@FE SP 2.4.
Exhausted air volume: 1,050 m3/h.
Power supply: 230V 50Hz.
Sound pressure: <65 dB(A).

Additional Information
The cabinets are equipped with two centrifugal motor blowers that self-regulate speed based on filter clogging levels, ensuring optimal performance. They also feature a fluorescent lamp with a heat emission of 130 Kcal/h and a lighting level of ≥750 Lux.

Catalog excerpts

S@FE SP Special Cabinets for Robot S@fe SP cabinets have been designed in order to provide a controlled environment in which place liquid handling robots. The cabinets provide the same level of containment of a Class II cabinet as defined by the EN12469:2000 norm (Apf >105). With up to 2.4m of internal width available, S@fe SP cabinets provide enough room to comfortably fit liquid handling robots. In order to allow easy installation of the cabinet and the robot, S@fe SP are designed to be completely disassembled before shipping and reassembled in place at customer site! BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede Amministrativa: Via Figino, 20/22 – 20016 – Pero (MI) Italy Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12 – 27010 Siziano (PV

Open the catalog to page 1

Main Features - Internal surface in stainless steel AISI304 Internal power sockets Two exhaust filters on sides of the cabinet to avoid ceiling interference Cable pass-through on lateral glass HEPA H14 filters according to EN1822-1 (efficiency >99.995% on 0.1-0.2micron particles) Microprocessor controlled LCD display with softkey membrane controls Raised frontal grid to provide high efficiency frontal barrier (Apf >10 5) Lateral grids on working surface for better internal flow distribution Removable frontal grid for easy robot installation/maintenance Lateral cable pass-through Two internal...

Open the catalog to page 2

Assembly diagram BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede Amministrativa: Via Figino, 20/22 – 20016 – Pero (MI) Italy Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12 – 27010 Siziano (PV

Open the catalog to page 3

All BioAir catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list