S@fe3 Class III MICROBIOLOGICAL SAFETY CABINETS Safety you can afford Technical Specifications • • • • • • • • • • • Manufactured in accordance with EN12469:2000 standard State of the art microprocessor control system Main switch with removable key Soft touch keyboard Bar graph for exhaust air flow conditions; permanent display Alarms for low air flow Sloped front for the most comfortable access Front and side access for filter maintenance and service C-shaped support stand for easy oneman installation procedure Transfer hatch with interlocked doors Class III cabinet with exclusive three filter design and Class 100 inner chamber. BioAir S.p.A. - Tel.: +39 0382 6672.1 www.bioair.it - [email protected] Numero REA MI – 2577880 Partita IVA e C. Fiscale: 11078210967 - Cap. Soc. Euro 3.000.000 i.v. Sede Amministrativa: Via Figino, 20/22 – 20016 – Pero (MI) Italy Sede legale: Via Pagano, 61 - 20145 – Milano - Italy Sede Produttiva: Via Lombardia 12

Main specifications • • • • • • • • Controls comfortably located at eye level Fan speed and aeraulic controlled by Microprocessor Three operating modes: normal, stand-by, calibration High speed rinse at start up Self calibration and internal Watch-dog cycle before “SAFE” condition is reached Visual display of “SAFE” conditions and “UNSAFE” conditions (LED and bar graph) Elapsed time meter Microprocessor control with following specifications: o Multilevel alarms, with redundancy functions. o Permanent display of working conditions. o High air flow stability both in case of transitional disturbances...

Soft touch control with keys for standard service utilities. Interconnected UV and fluorescent lights. 100% air exhaust single centrifugal motorblower Light intensity on work surface > 1000 lux. Noise level ≤58 dB(A) Work surface displacement (vibration) <0.005mm RMS between 20Hz and 20,000Hz (ISO 5349 tested and certified) Max power (for each power point): 3Amps. Microprocessor equipped with analogical watch-dog. Leakage tested in agreement with EN 12469 and ISO10648.2 CE certification according to Machinery Directive 2006/42/CEE Order number Overall size (wxdxh) mm Work Chamber size (wxdxh)...